Specifications
1)WP:2000-15000psi
2)Nominal Bore:2-1/16"~4-1/16"
3)working medium: oil, natural gas, mud
API Spec 16C Choke and Kill Manifold
API Spec 16C Choke and Kill Manifold
·Working Pressure3000PSI--15000PSI
·Nominal Bore2-1/16" --- 4-1/16 "
·Working medium: oil, natural gas, mud
·Working temperature: -46 degrees to 120 degrees
·When full ram seals well, inject weighted mud into well bore to perform well killing.
·When well blowout occurred, inject water into well through kill manifold to prevent be on fire.
·When the well is on fire, inject extinguishing agent into well bore through kill manifold to put out fire.
Specifications
Dia:3 1/8*2 1/16 4 1/16*2 9/16 4 1/16*3 1/16
pressure:14mpa,21mpa,35mpa,70mpa,105mpa
High quality with competitive price
API hydraulic kill manifold
1. Application
In case of increase in well head pressure, the manifold can provide a means of pumping heavy drilling fluid into the well to balance bottom hole pressure so that well kick and blowout can be prevented. In this case, by using blow down lines connected to the kill manifold, the increasing well head pressure also can be released directly for bottom hole pressure release, or water and extinguishing agent can be injected into the well by means of the kill manifold. The check valves on the kill manifold only allow injection of kill fluid or other fluids into the well bore through themselves, but do not allow any backflow so as to perform the kill operation or other operations.
2. Structure
The manifold consists of check valves, gate vales, pressure gauges and pipelines. The one end of the kill manifold is connected to the drilling spool and the other end is connected to the pump. The manifold and choke manifold are both designed to API 16C and can be used together. The manifold is available from 14MPa, 21MPa, 35MPa and 70MPa pressure ratings.
3. Operating Requirements
(1) Working pressure of all pipelines, gate valves and check valves shall be compatible with that of the BOP stack used.
(2) The manifold is not intended to be used as common lines for pouring drilling fluid.


