Model:3x2D-HH-HC
Detailed introduction to quality centrifugal slurry pump:
Type Notation---3x2D-HH-HC
HC---Hengchang factory name
2--- Discharge diameter (inch)
3----suction diameter (inch)
D----frame type with maximum power
HH---High head
Detailed information of centrifugal slurry pump
1) Cantilevered, horizontal, centrifugal, single stage slurry pump
2) Widely application: They are designed for handling abrasive, high density slurries in the metallurgical, mining, coal, power, building material and other industrial departments.
3) Long bearing life: The bearing assembly is with large diameter shaft and short overhang.
4) Wear resistant and anti-abrasion wet parts: The wet parts can be made of hard metal (24-28% Chrome alloy) or pressure molded rubber. They are completely interchangeable with each other. More materials are also available.
5) Easily replaceable liners: Liners are bolted to the casing.
6 Simple maintenance throat-bush: the mating face of the throat bush is tapered, so the wear is reduced and removal is simple.
7) Easy adjustment of impeller: An impeller adjustment mechanism is provided below the bearing housing.
8)High efficiency and high head design are also available.
9)Centrifugal seal , mechanical seal and packing seal are available.
Model sheet:
Hengchang HH Series slurry pump | Impeller Diameter (mm) | |||||||
Allowable mating Max. Power(kw) | Clear Water Performance | |||||||
Capacity Q | Head H(m) | Speed n/(r/min) | Eff. η% | NPSH (m) | ||||
m3/h | 1/s | |||||||
1.5x1C-HH-HC | 30 | 16.2-34.2 | 4.5-9.5 | 25-92 | 1400-2200 | 20 | 2-5.5 | 330 |
3x2D-HH-HC | 60 | 68.4-136.8 | 19-38 | 25-87 | 850-1400 | 47 | 3-7.5 | 457 |
4x3E-HH-HC | 120 | 126-252 | 35-70 | 12-97 | 600-1400 | 50 | 2-5 | 508 |
6x4S-HH-HC | 560 | 324-720 | 90-200 | 30-118 | 600-1000 | 64 | 3-8 | 711 |
8x6S-HH-HC | 560 | 468-1008 | 130-280 | 20-94 | 500-1000 | 65 | 4-12 | 711 |



