Latex Tubular Centrifuge Separator

1) Liquid-solid or Liquid-liquid separation
2) Model No.: 45/75/105/125/150
3) Capacity: 200-3000L/Hour

Application:
The process is as follows: after the rubber milk has been harvested, collected and transported to the production facilities, it is first stored in large sedimentation tanks to separate off impurities. After a certain settling period, the latex milk is passed to the separator system.

The separators separate the majority of the aqueous phase, the so-called “skim milk”, and other contaminants from the plantation milk. The plantation milk, also known as “field latex”, contains around 30 percent latex. After separation of the skim milk, the latex fraction in the concentrate increases to over 60 percent. once stabilizing additives have been added, the concentrate is sold as commercially-available latex.

This product is especially good for making rubber gloves, condoms, balloons or other molded thin-walled rubber items.

The aqueous skim milk can still contain up to five percent latex. By adding chemicals in a treatment system downstream of the separators, rubber can be recovered from the skim milk. The natural rubber obtained by this means is sold in blocks and used for more robust rubber items, in particular car tires.

Main purpose:
Latex Tubular Centrifuge Separator is professional designed for latex products separation with high speed, large capacity and perfect separation performance. It is used for separation of various suspensions which is difficult to be separated especially for separation of solid-liquid suspension which has low concentration, high viscosity, small granularity and very small difference of solid-liquid gravity.

Working principle:
This separator is consisted of main body, driving device, bowl collecting pan and liquid-in bearing seats. The upper of the bowl is flexible main shaft and the lower of it is damp floating. The main shaft is connected with a driven wheel by the coupling seat with the buffer. The powder is transmitted to the driven wheel by the motor through the transmissions belt and the tensioner to make the bowl rotate around its own axis at an over speed and form a strong centrifugal force field. The product sprays into the liquid inlet from the bottom and liquid is forced to flow upward along the inner wall of the bowl and then is separated into different layers according to different density.

High density granular settle down on the inner wall of the bowl gradually to form residue layer and then are discharge manually after the machine stops. The liquid clarified flows out of the liquid outlet at the bowl's upper.

Technical Parameters 
     
Item/Type:GQ/GF45   
Bowl    Inner Diameter: 45 
 Height(mm): 240 450 
 Sedimentation Volume(L): 0.4 
 Max Speed (r/min): 28000 
 Maximum Separation Factor: 28500 
 Inlet Nozzle Diameter (mm): 2/2.5/3 
 Material Inlet Pressure (mpa): more than0.05Mpa    
 Capacity Water capacity (l/h): 100 
Motor : Co-current High Speed  Motor  
 Power (kw/h): 0.4 
Overall Dim.(L*W*H(mm) ): 500×400×760 
 Weight (kg): 90

Item/Type:GQ/GF75   
Bowl    Inner Diameter: 75 
 Height(mm):450 
 Sedimentation Volume(L): 2.2 
 Max Speed (r/min): 19000 
 Maximum Separation Factor: 15200 
 Inlet Nozzle Diameter (mm): 3/4/6 
 Material Inlet Pressure (mpa): more than0.05Mpa    
 Capacity Water capacity (l/h):600 
Motor : 3 Phase Two Pole Motor   
 Power (kw/h):1.5 
Overall Dim.(L*W*H(mm) ): 760×450×1120 
 Weight (kg): 300 

Item/Type:GQ/GF105   
Bowl    Inner Diameter:105
 Height(mm):730
 Sedimentation Volume(L): 6 
 Max Speed (r/min): 15600 
 Maximum Separation Factor: 15720 
 Inlet Nozzle Diameter (mm): 6/8/10 
 Material Inlet Pressure (mpa): more than0.05Mpa    
 Capacity Water capacity (l/h):1200 
Motor : 3 Phase Two Pole Motor   
 Power (kw/h):3 
Overall Dim.(L*W*H(mm) ): 840×500×1600 
 Weight (kg): 570

Item/Type:GQ/GF125   
Bowl    Inner Diameter:125
 Height(mm):730
 Sedimentation Volume(L): 8
 Max Speed (r/min): 15000 
 Maximum Separation Factor: 15750 
 Inlet Nozzle Diameter (mm): 6/8/10 
 Material Inlet Pressure (mpa): more than 0.05Mpa    
 Capacity Water capacity (l/h):1500 
Motor : 3 Phase Two Pole Motor   
 Power (kw/h):3 
Overall Dim.(L*W*H(mm) ): 900×550×1600 
 Weight (kg): 610

Item/Type:GQ/GF150   
Bowl    Inner Diameter:147
 Height(mm):730
 Sedimentation Volume(L): 10
 Max Speed (r/min): 15000 
 Maximum Separation Factor: 14300 
 Inlet Nozzle Diameter (mm): 8/10/12 
 Material Inlet Pressure (mpa): more than 0.05Mpa    
 Capacity Water capacity (l/h):2500 
Motor : 3 Phase Two Pole Motor   
 Power (kw/h):4
Overall Dim.(L*W*H(mm) ): 900×550×1600 
 Weight (kg): 665