Model:SX-600
2012 Best selling waste electric cable pulverzier
1.patents of waste electric cable pulverizer
An utility model patent certificate of granular electrical conductors and non-conductors separation device patent No.ZL200720089238.1
A utility model patent certificate of printed circuit board recycling wind pressure separator
patent No.ZL200720089239.6
2.Brief introduction of the waste electric cable pulverizer
1).The waste electric cable pulverizer is specially used to process all kinds of standard cables,
like automobile electric circuit wire and communication cable, and unclassified cables, which can be not processed by wire-
stripping machine.
2).After breaking, pulverization and high pressure electrostatic separation, the copper and plastic of cables and wires can be completely
separated for comprehensive utilization and to achieve a higher economic benefit without dust and secondary pollution.
3.The technology of the waste electric cable pulverizer
Model | Output/h(kg) | Power of Main Motor(KW) | Blower Fan(KW) | Vibrating Motor(KW) |
SX-600 | 400-500 | 30-37 | 3 | 0.75 |
SX-800 | 700-800 | 37-45 | 4 | 0.75 |
SX-1000 | 800-1000 | 45-55 | 5.5 | 0.75*2 |
4.The waste electic cable pulverizer
Separation Methods of waste electric cable pulverzier :
1). Dry-type waste electric cable pulverizer : The so-called dry-type waste electric cable recycling machine uses a separation method without adding water during separating and selecting process. This kind of copper-wire crusher uses the machine with an environment-friendly separation method, such as air flow separator, air shaking table or electrostatic separator. The main technological process is: crushing-air flow separating and selecting-(electrostatic separation)-dust collection (electrostatic separation rarely used on copper-wire crusher now).
2.) Wet-type separation: The wet-type separation is a relatively traditional method. This separation method is mainly from mineral separation. For wet-type separation, the gravity shaking separation is mainly used. Its technological process is: crushing (adding water)-gravity shaking separation (adding water). Since water is used during this process of production, in general, it causes little secondary pollution to the environment. But miscellaneous wires, plug cord and woolen yarn could be recovered effectively, so this method is widely used.
5.Advantages of waste electric cable pulverizer
This waste electric cable pulverizer is specially used to process all kinds of standard cables, like automobile electric circuit wire and communication cable,
and unclassified cables, which can be not processed by wire-stripping machine. After breaking, pulverization and high pressure electrostatic separation, the copper and plastic of cables and
wires can be completely separated for comprehensive utilization and to achieve a higher economic benefit without dust and
secondary pollution.
6.character of the waste electric cable pulverzier Characteristics:
1: This waste electric cable pulverizer uses our self-owned triple dust collecting unit (triple dust collector), including three stages, cyclone, cloth-bag and air cleaner dust collectors, which can effectively solve the dust pollution problems.
2. The waste electric cable pulverizer uses dry crushing and pulverizing to process the waste cable and wire into metal and non-metal mixture like plastic. Then the metal and plastic are separated through high pressure electrostatic separator.
3. The metal and plastic separation and recycling can be completed under multicomputer controlled one-time batch-feeding for crushing and automotive conveying, sound insulation technology and cooling system.




