Brand:JS
MOQ:3000
Quantity:10
1)characteristic
1, an evaporator refrigerant coil pipe isheated by high temperature vacuum drying operation, ensure thecavity without impurities in presence ofwater.
2, an evaporator coil frame end plate made ofhigh-quality steel plate, high strength, corrosion resistance, easyassembly.
3, an evaporator coil circuit according to thedesign flow rate required, using a single, double return system,good heat exchange performance.
4, fin evaporator and brass by mechanicalexpansion pipe, ensure good contact, give play to the best effectof heat exchanger.
5, an evaporator tube using high purity seamlesscopper tube, long service life, is not easy to crack corrosion.
2)Products
1,the company has no CFC clean standardrefers to the degree
residual water ≤ 20mg /m²;
residual impurity ≤ 30mg / m²,mineraloil≤7Mg / m² residue CL≤ 0.3mg / m², paraffin ≤0.2mg / m².
2,the coating quality standard
anodic oxidation:consistent with aluminum droplet lake experiment table
electrophoresispaint dipping: the thickness of 12-30 um
chemicalhydrophilic: color
12-30 um thickness,dipping varnish
corrosion resistance(GB2423) = 200H: electrophoresis without corrosion, varnished = 96no corrosion.
3)Technical performance
The main raw materials | Brass, aluminum tubes, aluminum foil |
Structure form | Brass, aluminum tubes into the fin expansion |
Heat exchange mode and performance | Refrigerant evaporation tube, fin, air-cooled,freezing and defrosting type finned evaporator, can satisfy thefrozen at - 18 degrees cold - 2 ~ 4, condenser will be thermallyinduced heat distributed all |
Surface treatment | Anodic oxidation: (aluminum, aluminum fin) dipvarnish, paint electrophoresis (copper tube aluminum fin) |
Internal quality | No leakage, can meet the requirements of CFC andCFC refrigerant internal cleanliness requirements |
Miscellaneous | Mainly for freezing type, type and size is notrestricted |
Aluminum tube aluminum sheet non-frost Condenser




