high quality wood router
Application:
It is widely used in steveosccopic wave plate processing,wood door, solid wood engraving,side washing, sofa leg engraving ,at the same time, It can engrave joss,zodiac animals,sculpture and the other stereo products.
Features:
1.Widely used, can engrave cylinder and three-dimensional products,but also relief sculpture.
2.Software high compatibility
3.Taiwan high precision square linear guide rail and German ball screw, stepper system,stable operation, low noise, high speed and high precision.
4.DSP control system, intelligent module,working long time with high speed.
5.Independent control cabinet,industrial-class wiring standards
6.Frequency conversion water-cooling electric spindle, the fast response,small power consumption.
7.Manual lubrication system,easily keep your machine in a good condition.
Technical parameter:
Descriptions | Parameter | Option |
Cylinder Processing Dimension | 250x1000x160mm |
|
Working Table Dimension | 1400mmx1300mm |
|
Maximum Working Speed | 6m/min |
|
Maximum Speed | 8m/min |
|
Quantity Of Spindle Motor | 6 |
|
Power Of Spindle Motor | 2.2KW |
|
Spindle Speed | 0-24000rpm/min |
|
Working Accuracy | 0.01mm |
|
Repositioning Accuracy | 0.01mm |
|
Driver Mode | German High Precision Ball Screw | Taiwan Ball Screw |
Driver System | Stepper System |
|
Software Supported | JDPaint,Artcam,Type3,MasterCAM,UG |
|
Command Format | G-code,HPGL,ENG4.X,ENG5.X |
|
Control System | Ncstudio5.55 Or DSP System |
|
Working Voltage | AC 220v,50/60Hz |
|
Samples:
For more information ,please contact us
Skype:andy860929
(86)137-6040-7925




