Metallurgy, Mineral & Energy
Automatic 2400 6X12 Short Cycle Hot Press Line
2016-11-02 14:20  Views:232
Price:Negotiable
Send Inquiry

 

The main technical parameter of 2400T 6×12 hot press machine automatic line

1, Total pressure: P=24000KN

2, Size of heating plate: 3850mm×1940mm

3, Board size: 3660mm×1830mm

4, Main cylinder: D=400mm  Quantity:8

5, Daylight: H=350mm  

6, Loading in width direction, Paper feed manually, automatic trimming.

 

No.

Name

Parameter

Remark

1

Finished Specification

 

(8~30)×1830×3660mm

 

2

Pressing Cycle

According to technological request

about 50s

3

Specific pressure 

24000kN(2400 ton)

 

4

Unit working pressure

≤35.8kg/cm2 

 

5

Size of heating plate

1940×3850mm

 

6

Daylight opening

350mm

 

7

Main cylinder(Diameter×stroke)

400×350mm  8 units

 

8

Oil pressure of hydraulic system

≤25MPa

 

9

Temperature of heating plate

≤210°C

 

10

Temperature control of heating plate

Temperature control meter by digital setting(With secondary cycling system)

prepared by user self

11

Temperature control precision of heating plate

(Upward and downward heating plate controlled separately)

 

12

Working of loading device

Clamp type

 

13

Speed of loading device

≤70m/min

 

14

Drive mode of loading device

Inverter

 

15

Control mode of whole wire

PLC

 

19

Arrangement of energy

0.48MW(40×104 kcal/h)

 

20

Heating media of heating plate

Thermal oil (Boiler prepared by user self)

 

21

Total power: 

~90kW

 

22

Arrangement of compressed air

~3.5m3/min  0.6Mpa

 

23

Wind quantity of ash separator of brusher

(Compressed air prepared by user self)~7000m3/h

 

24

Gross Weight

~140000kg

Whole line

 

25

Size of the line (Length×Width×Height)

51000×11500×4000mm

(Above the ground)

 

 

 

 

 

Details of Line:

 

1)            Loading lifter

 

Gross weight:   1000 kg

 

Function: Feeding the pallet of board to the lifter. Then it will hold in the right position to make the board loading easily. It was control by the hydraulic system and photo electricity reply.  

 

2)            Loading Belt table

 

Gross weight:   1000 kg

 

Function: Worker can lay down the paper with board together, and it will transfer into the press automatically. We using Germany brand Moto.

 

3)            Main press

 

Gross weight: 58000 kg

 

Function: Laminated the products. With extra support part to enlarge the strength of machine body. Main hydraulic valve was using germany brand. It request cooling system for hydraulic system and secondary recycling heating system for heating plates.  

 

4)            Vacuum Unloading system

 

Gross weight: 2000 kg

 

Function: After laminated, the vacuum unloading plate will take out the board inside the press. It avoid the scratch of the board and make the worker’s job easy.  

 

5)            Unloading lifter

 

Gross weight:   1000 kg

 

Function: Lay down the board to the lifter. It can hold in the right position to make the board unloading easily. It was control by the hydraulic system and photoelectricity reply.  

 

6)            Cooling System for hydraulic oil(Option)

 

Gross weight:   400 kg

 

Function: Cooling down the hydraulic oil’s temperature and extend the lift of hydraulic parts. 

 

 

7)            Secondary recycling heating system (Option)

 

Gross weight:   500 kg

 

Function: The pipe system with temperature control valve can keep the temperature correctly and make sure it changed in small Torrance. It was the best solution for heating system.

 

Contact Infomation
Send Inquiry
Company name:Wuxi Lutong Machinery Co., Ltd.
Status:[Offline] [Send message] [Chat]
Business contact:Jia Alvin(Ms.)
Telphone:
Mobile:
Fax:
Area: Caribbean Region-Bermuda
Address:Dongqing Village, Yangshan Town, Wuxi, Jiangsu, China (Mainland) Zip: 214156