tire shredder waste tyre recycling machine
This machine apply to crushing waste tires or scrap rubber into rubber powder
Many advantages are here:
(1). Energy saving by 1/3 compared with other machines of the same model in the market. The money saved in one year can buy another whole tire recycling line .Our machines apply ball and roller bearing while others use plain bearing, as we all know , roiling friction can save more energy than sliding friction, this is the patent that we possess. So our machines can save about 1/3 energy while the output is the same compared with other machines in the market.
(2). From our 20 years' experience and the feedbacks of our clients, we improved the roll ratio from 1:1.38 to 1:1.94, this greatly raise its output. It is our exclusive technology.
(3). Our mature technology and experienced staffs ensure the best quality and less breakdown, In addition, you can get our timely response when you meet problems.
(4). We will be responsible for the installation and training.
Technology parameter
Model | Roller length Mm | Front roll speed (m/min) | Roll Ratio | Max space of roller(mm) | Motor Power (KW) |
XKP-350 | 300 x 500 | 17.6 | 1:1.92 | 10 | 30 |
XKP-400 | 400 x 600 | 21.6 | 1:1.92 | 10 | 45 |
XKP-450 | 450 x 760 | 25.3 | 1:1.93 | 10 | 55 |
XKP-560 | 560 x 800 | 28.6 | 1:1.94 | 10 | 75 |
Then we need to know how the machines work.
Steps:
1.Cut off the sidewall of the tire by the tire ring cutter first, then process the sidewall of the tire by steel separator and the tire ring by strip cutter.
2. The sidewall of the tire will be divided into steel wire and rubber, then put the rubber and the strips of rubber which is processed by the strip cutter into the block cutter. Then they will be cut into blocks.
3.Put the blocks of rubber into the main machine, blocks will be crushed into powder.
4.When the powder conveyed to the other parts of the crushing line, the fiber will be filtered out by the nylon separator, the small steel wire will be filtered out by the magnetic separator and the powder will be filtered out from the vibrating screen. 5.Then you can get the last products: rubber powder, steel wire and fiber.
Then the machines in the whole line will be told.
Tire ring cutter machine
This is the ring cutter machine, it can cut the tires easily. You should put the tire on it, then fixate the tire, 4kw Motor Power will work , then cut the sidewall of the tire by the knife. The weight of the machine is 650kg, and the output at 40pcs/hour, of course, it is according to the worker who is operating it.
Tire strip cutter machine
This is strip cutter machine, to cut the tires into strips. You will need to put the tire between the two round knives, then it will be cut into strips. And the weight is 850kg, output at 2.5ton/hour.
Tire block cutter machine
This is block cutter machine, which can cut strips into blocks at about 4cm*4cm, and the motor power is 4kw, can process 0.8ton/hour, and the weight of the machine is 800kg.
Steel wire separator machine
When you cut the sidewall of the tire , you may see the steel in the sidewall, then put the sidewall in this machine, it will separate the steel wire out of the sidewall of the tires easily.
Conveyer equipment
This is a machine to convey the rubber blocks and granules into the machine.
Main vibrating screen
The machine can filter the rubber granules out of the rubber blocks. You can get different sizes by designing different filter screens.
Fine vibrating screen
This machine can filter out the rubber crumb from rubber granules, you can change the filter screens to get different sizes products.
Magnetic extractor
When we meet some tires with steel and wire, this machine will work, it can get the steel and wire out of the tire rubber. You will don’t need it when you process the tires without steel and wire.
Fiber separator
This machine is used to separate the synthetic cord out of the rubber granules and crumb.
Main machine and its peripherals
Main machine:XKP-350/400/450/560
Peripherals: Conveyor equipment, Main vibrating screen, fine vibrating screen and two magnetic extractors. The other machines are independent.
Energy saving is the important thing in the process, so we make a lot of effort on it. And now energy saving is our patent for the machine. It can save 30% energy compares with the old generation.
This is the certificate for the energy saving patent.
After-sales
Our professional team will help you handle the problems you may meet, including installation, commissioning, repair and maintenance. So, when you meet the problems, please don't hesitate to let us know, then we will be able to do our best to make the problems be solved in time.




