CHEER is a leading manufacturer of high performance PC hollow profile production line .  and we have exported tens of the lines to the other countries worldwidely

PC hollow profile production line is widely  used  in  producing hollow  sheet  for glazing, roofing,ceiling,  cladding panels, shed roofs,  vaults, green house, conservatory,partion pands, skylights,advertising panels,signs etc

   CHEER equipment with it's own know-how, especially on the calibrators and annealing oven, the features are as follows :

1. High percentage of recycled material can be  added.
2. High speed screw, low energy consumption with high rotation speed to match gear pump and stable pressure,output capacity is 25% higher than other brand extrusion lines because of special design of forming plates.
3. Special designed cooling system for all section of forming plates, and unique designed vacuum system for each section of forming plate.
4. Special designed temperature control oven with cross heat shrink forming, which is much easier to be controlled than other brand extrusion lines.
5. The softness of pull rolls could be customized on request to extend its stretch.

1. The air capacity of hollow sheet and low pressure could be adjusted and controlled slightly, which is easily to be controlled than any other brand extrusion lines.
2. Unique design of T-Die by JC Times for hollow sheet. The thickness of hollow sheet could be produced from 4mm to 36mm and the sheet composed by walls from twin-wall, triple-wall to 4-wall even multi walls. The ribs connected between walls could be rectangular. diagonal or hexagonal shape.
3. Anti-UV co-extrusion layer could be one sided or two sided, outer surface could be sandy or glossy according to the configuration of the line.
4. The vacuum calibrator featured with wear-resistance, dirty free and the lifting, falling and leveling for the forming plates is much more  easier to be controlled.

Welcome to Cheer,to China.

web:www.xinquanchina.com