Dear friends ,
welcome to our company site !
JD series automatic bottle blowing machines characteristics
1. Automatic PET Stretch Blow Moulding Machine
2.5600-6000pcs/h
3.Accessories for the world famous brand is more than 90%
4. Adopts advanced microcomputer control system, stable performance
5 Conveyor automatically send embryos
6 .Adjust infrared heating lamps based on touch the temperature, the operation is simple, convenient, strong penetrating power, bottles of embryo heated, heating uniform, rotating rapid and stable.
JD-06X Main technical parameters
Composition | Project | Technical parameters |
Products conditions | Products maximum volume(L) | 600mL |
Products maximum diameter (MM) | Φ70 | |
Products size bottle (MM) | Φ12 ~ Φ38 | |
Products maximum height(MM) | <240 | |
Suitable for embryo tube maximum height (MM) | <115 | |
Shut the mould trip | 82 mm | |
Bottom-formwork trip | 50mm | |
Bottle spacing (MM) | 76.2 | |
Mouldstandardthickness (MM) | 168 | |
Production capacity (bottles/hour) | 5,600~6,000 | |
Mold cavity number | 6 | |
Heating part | Heating unit | 4 |
Heating lamp layer | 6 | |
| Germ tubes seat number (a) | 114 |
Electrical parameters | Voltage | 220/380V |
Frequency | 50/60Hz | |
Use power | 24~28.8kw/h | |
Installed power | 50.5kw | |
Air (High-pressure gas consumption PET bottle volume on and calm) | Low voltage compressed air pressure | 8~10bar |
Low voltage compressed air gas consumption | 2.0~2.5m3/min | |
High-pressure compressed air pressure | 26~35bar | |
High-pressure compressed air gas consumption | 3.6~4.2m3/min | |
Cooling water | Pressure | 3~4bar |
Cooling water (temperature≤18°C) | Temperature | 5m3/h |
Weight | HostHeating machineBody,etc | 5.5t |
Equipment configuration dimensions | Sixe (L×W×H) | 4850mm×2150mm×2100mm |
Richard embryo machine (L×W×H) | 2550mm×2120mm×2900mm |
Please login link below to watch machine operation demonstration
http://www.tudou.com/home/_91767339/
