Send Inquiry
Servo System Plastic Injection Machine
| Specifications | Unit | Model Number | |
| HYW1380A | HYW1380B | ||
| Screw Diameter | mm | 42 | 45 |
| Screw L/D Ratio | L/D | 20 | 18.6 |
| Theroretical Shot Volume | cm3 | 249 | 286 |
| Injection Weight | g | 227 | 260 |
| Injection Rate | g/s | 116 | 129 |
| Plasticizing Capacity | g/s | 19 | 22 |
| Injection Pressure | Mpa | 171 | 149 |
| Screw Speed | KN | 200 | |
| Clamp Tonnage | mm | 1380 | |
| Toggle Stroke | mm | 380 | |
| Space between Tie-Bars | mm | 420 x 420 | |
| Permitting Mould Thickness | mm | 150 - 410 | |
| Ejector Stroke | mm | 120 | |
| Ejector Tonnage | KN | 38 | |
| Max Pump Pressure | Mpa | 16 | |
| Pump Motor Power | KW | 13 | |
| Heater Power | KW | 7.8 | |
| Machine Dimensions (L x W x H) | m | 4.3 x 1.36 x 1.8 | |
| Machine Weight | T | 4.3 | |
| Unit Name | Double scale & Proportion Displayer | |
| Electric Unit | Computer | Porcheson |
| Control Switch | Schneider TE. | |
| OMRON | ||
| Circuit Breaker | Schneider TE. | |
| AC Contactor | Schneider TE. | |
| Position Scale | MOTO, MILON | |
| Hydraulic Unit | Oil Pump | Vicks |
| Five Star Motor | IDERMO, MOTO | |
| Mould Adjustor Motor | PLANET | |
| Double Proportional Valve | HNC | |
| Directional Value | FINOTEK, HP, CHUANDA | |
| Sealing Element | HALLITE, CF, DZ | |
| High Pressuer Oil Pipe | Xiongcheng | |
| Servo Unit | Driver | Modrol |
| Servo Power | Schultz | |
| Oil Pump | Sumitomo | |
| lubricating Way | Auto or Central quantitative | |
| Alterative Power for Auxiliary Engine | Alterative | |
| Humper | Self-adjusting | |
| Standard Equipments: | ||
| 1) Double-cylinder balance injection system | ||
| 2) Multi-stage pressure and speed injection | ||
| 3) Back pressure adjustment device | ||
| 4) High speed clamping | ||
| 5) Low pressure mould protection | ||
| 6) Multiple hydraulic ejector knock-out | ||
| 7) Mechanical, electrical & hydraulic safety devices | ||
| 8) Lubrication system | ||
| 9) Hydraulic pressure full proportional control | ||
| 10) All computer control system | ||
| 11) Molding data memory system | ||
| 12) Large LED Screen | ||
| 13) Multiple options of computer CPU systems | ||
| 14) Linear displacement transducer for injection, clamping and ejection | ||
| 15) Optimized composition of hydraulic control elements of the world famous brands | ||
| Standard parts: | Spart parts: | |
| 1) Mechanical leveling pad | 1) Robotic pincher | 5) Plastic dehumidizer |
| 2) Spare parts kit | 2) Hopper magnet | 6) Mold temperature controller |
| 3) Tool box | 3) Mold clamps | 7) Auto loader |
| 4) Water cooler | 8) Hopper dryer | |
Servo Drives Control Principle
Clamping Unit
Electric Control System
Hydraulic Unit
Injection Unit



