Send Inquiry
This series extruder is widely used in the field of auto, motorbike spare parts, filter, electronic tool, pneumatic tool, electric power tool, door closer, lamps and lanterns, ex-proof products, pneumatic component, electric motor, diesel engine, petrol engine, water pump.
Technic parameter
| Items | units | DCC160 | DCC500 | DCC700 |
| mould locking force | KN | 1600 | 5000 | 7000 |
| mould locking distance | mm | 380 | 580 | 720 |
| ejecting force | KN | 105 | 240 | 315 |
| ejecting distance | mm | 85 | 120 | 160 |
| thickness of mould | mm | 200-550 | 350-850 | 350-900 |
| plate size(horizon+vertical) | mm | 680*685 | 1162*1162 | 1300*1300 |
| hammer diameter | mm | 50/60 | 70/80/90 | 80/90/100 |
| injecting(Al) | kg | 1.3/1.8 | 4.3/5.6/7.1 | 6.5/8.3/10 |
| injecting force | KN | 257 | 460 | 610 |
| casting pressure | mpa | 130/90 | 122/93/73.5 | 121/95.5/77.5 |
| casting area | cm² | 120/175 | 405/535/680 | 570/725/895 |
| max casting area(40mpa) | cm² | 400 | 1250 | 1750 |
| injection chamber flange diameter | mm | 101.6 | 165 | 150 |
| system operating pressure | mp2 | 14 | 16 | 16 |
| oil tank volume | L | 400 | 1000 | 1100 |
| weight | kg | 7000 | 25000 | 38000 |
| equipment size(L*W*H) | mm | 5400*1300*2700 | 7500*2100*3000 | 8975*2800*3135 |
| idle loop | sec | 7 | 12 | 12 |
| electric motor power | kw | 15 | 37 | 37 |




