up to 1600 celuis silicon carbide heating element with 20 years producing experience
1.The General Description of silicon carbide heating element
1). production process:made into blank,silicided under high temperature and re-crystallized.
2)character: high-applied temperature ,anti-oxidization ,anti-corrosion ,long service life ,little deformation,easy installation and maintenance.
3)usage: used in various high temperature electric furnaces and other electric heating devices,such as in the industries of magnet,ceramics,metallurgy ,glass,and machinery.
4) physical properties of element
specific gravity | 2.6~2.8g/cm³ | bend strength | >300kg |
hardness | >9 MOH′S | Tensile strength | >150kg/cm³ |
porosity rate | <30% | radiancy | 0.85 |
5)Recommend surface load
Furnace Temp (°c ) | 1100 | 1200 | 1300 | 1350 | 1400 | 1450 |
Surface load of hot zone (W/cm²) | <17 | <13 | <9 | <7 | <5 | <4 |
2. Advices of using the element
1)In order to keep furnace temperature and the charges uniform of each element, before installation resistance distribution must be carried.
2)As the element is very brittle ,be careful while install and maintain to avoid any damage.
3)when start to operate the furnace ,raise voltage slowly and gradually,never give full load at one time.
3.When you place order,pls tell us following data
1)Outer diameter(OD):mm
2)Length of Hot zone(HZ):mm
3)Length of Cold end(CZ):mm
4)Length of Overall(OL):mm
5)Shank spacing(A):mm
6)Resistance(at 1050C+/-50C)
More than 20 years production experience.
All the specifications can be made according to your request.




