1. Side air blow, the cold air blows both sides of stainless steel band from two directions, short air circulation cycle, fast freezing, and low moisture loss from products.
2. Aluminum evaporator, which features efficient heat exchange, large fins.
3. The evaporator is installed along the conveyor; large windward area avoids the frost block and prolongs the defrosting cycle.
4. Water defroster, associated with hot ammonia to melt the frost down, which ensures the s anitation requirements.
5. The door on the enclosure and the walkways along the both sides of the conveyor give sufficient access for internal cleaning during down time.
6. The cabinet covers and frames are made of stainless steel, which ensures sanitation requirement.
7. The stainless steel band is made of imported food grade S/S plate, which features good elasticity, high strength and low deformation.
8. Stepless speed adjustment by inverter, the freezing time can be adjusted per products’ property
9. There are drives at both infeed side and outfeed side, which allows excellent belt steering
10. Efficient washing equipment, which ensures the cleanliness of the stainless steel band.
Freezer data:
Belt | Chain driven mesh belt |
Belt material | 304 Stainless steel |
Belt net width | 2800mm |
Belt height | 1160mm |
Length of enclosure | 16000mm |
Overall dimensions | 16000×3950×2660mm |
Material of construction | Stainless steel & Aluminium |
Freezing time | 20 to 60 minutes adjustable |
Temperature inside enclosure | -35 °C |


