Metallurgy, Mineral & Energy
Aluminum Flux Cored Welding Wire (ER4047)
2016-11-02 04:50  Views:74
Price:Negotiable
Send Inquiry

As one of our most popular hit products, aluminum flux cored wire could replace ER4047,and need no more flux.  Aluminum flux cored brazing wire is different from common aluminum filler metal, which needs argon welding. Unlike ER4047 aluminum brazing wire requiring flux, our aluminum flux cored brazing wire could work directly in flame brazing or induction welding. Because of self fluxing, flux and relative operations are not needed. Precise set proportion has avoided many problems provoked by adding flux when traditional manual welding applied. It improves welding quality, simplifies operation, increases producing rate, and realizes automation manufacturing. Our aluminum flux cored wire and copper aluminum flux cored wire are made of environment-friendly and non corrosive flux. It needs no wash after welding, and has an advantage of little harm to base metal.The demanded amount from our custom is very large. We could make it in rod and ring sharp for easy operation to meet our custom requirement.

  

Chemical Compositions(%): Si, Al, rare earth, fluoaluminate(flux).

Welding Temp.(°C):570-582

 

Advantages and Usages:

1.Flux and relative operation are not need.

2.Good fluidity and smooth welding joint

3.No acid cleaning need.

 

 

Method:

1.Sand the welding position and work piece ( oil, rust and oxide must be cleaned away).

2.Heat welding position evenly by moving welding torch.

3.When temperature reaches 570°C, flux cored rod should be added. Then rod melts, and make it flow into the joint evenly. 

4.When the welding seam full, move torch away.

5.Cool down.

Contact Infomation
Send Inquiry
Company name:Zhejiang Yuguang Aluminium Material Co., Ltd.
Status:[Offline] [Send message] [Chat]
Business contact:Nick Canbell(Ms.)
Telphone:
Mobile:
Fax:
Area: Caribbean Region-Bermuda
Address:22 Hehua Road, Wuyi Industrial Zone, Jinhua City, Zhejiang Province. China