Detailed Product Description
1.High performacne and high efficiency
2.The advanced vacuum vulcanizing machine
3.Mixed Driving force,saving time and money
The advanced vacuum vulcanizing machine
Principle
-Heated bins in being above the hot air heated up just in the collection box, the switch temperature difference of only 5 °C, less demand for heat.
-Hybrid power
-Vacuum drying temperature of boiling evaporation of low demand
-All closed environment, greatly reducing heat loss energy
-With heating box right above, the rising hot will be just collected in the box. Temperature difference between on and off is only 5°C, thus requiring less heat.
-Hybrid power
-Boiling and evaporating in vacuum environment, and requiring lower temperature for drying
-Fully-enclosed environment substantially reduces heat loss.
Characteristics
-The machine uses steam spray device, the first jet wet shoe, and then rapid heating and drying, apply again and again vacuum forming, so that upper head with a vacuum-last match;
-German original vacuum pump, durable, vacuum time for 3-5 minutes, adjust the temperature according to different materials in order to achieve the best results;
-The machine is sealed heating, low energy consumption, low noise, saving shoe last, lower manufacturing costs; such as pressure by the natural cooling after the end of 10-15 minutes later, the increase of the hardness after the set, after the effect of de-stretch better .
Intuitive control: the touch-screen set temperature, time, and directly showing the parameters of transformation; temperature small: switch door, only to provide 5 °C heat.




