Send Inquiry
| Disc Kerb Stone Procssing Program is the professional equipment for processing roadside stone, tombstone, stone for paving square, platform, etc. If using it with three pieces blade machine, the Bar Stone Processing and Production Line will be made up, and the efficiency will be improved. The features of this machine are as following: Designs reasonably, has the good rigidity, the work steady cutting efficiency high Because of the assistance support be used in the fore-end main shaft, and the main shaft revolves smoothly, Operation easy, in the movement of main shaft the request of stone position is not high. It is easy to exchange the blade. The automaticity is high. The control section adopts manual and semi-automatic control, and the working table adopts stepless speed regulation. The using range is wide, and be used for cutting the bar stone which the width is less than 1000mm. | |
| Name | YHDTJ-6 |
| Max. No. of blade | 6 |
| Max. diameter of blade | Φ1000mm |
| Journey of air cylinder | 600mm |
| Worktable itinerary | 2500mm |
| Right-left movement journey | 300mm |
| Worktable area | 1700*1200mm |
| The max. feeding speed of the trolley | 5920mm/min |
| Total power | 40.75kw |
| Dimension | 7000*3800*2800mm |
| Weight | 6000kg |
| |
Find any interest in our products, inquiry us now.Thank you!
