TK series tertiary impact crushers are used in tertiary
crushing process. These crushers are designed for crushing
soft and medium hard materials. The rotor of these
crushers may turn in both directions thus all four corners
of the hammers is used. When one corner of the hammer
is weared the crusher is run in the other direction and after
the second corner is weared the hammer is turned upside
down to use the other two corners. The material is crushed
while it impacted by the rotor’s hammers to the adjustable
breaker bars and it does not leave the crusher until it be
crushed and reduced to the size which the breaker bars set
to. By this adjustable breaker bars the maximum size of output
material can be determined.
These impact crushers is driven by an electric motor and
the power is transfered to the crusher by means of V-belts.
General Features ;
• Higher capacity and performance
• Running in two direction
• Fast and safe breaker bars setting adjustment
• Fast and easy maintenance
• Easy Access to hammers by hydraulically operated door
assembly
• Easy to install
• Easy operation
Type | TK700 | TK1000 |
Rotor Diameter (mm) | 1200 | 1200 |
Rotor Width (mm) | 700 | 1000 |
Capacity ( t/h ) | 75-100 | 100-150 |
Drive (kW) | 110-132 | 160-200 |
Weight (kg) | 10000 | 13000 |
Dimension A (mm) | 2600 | 2600 |
Dimension B (mm) | 500 | 500 |
Dimension C (mm) | 1700 | 2000 |
Dimension D (mm) | 2500 | 2500 |
Dimension E (mm) | 870 | 1170 |




