Mining gold jigger machine iron ore processing equipment:
Application and performance:
The difference between Saw-tooth Wave Ladder Jig and Sine Wave Jig is that the pulsation curve for jigging is saw-tooth wave shape, with speedy upward flow and slow downward flow. Bed layer is elevated integrally and slowly dropped with a long effective loose time, allowing significant increase of handling capacity for unit screen surface, decrease of lower limit of grain size recovery and large save of make-up water for undersize fraction. Industrial tests carried our of Saw-tooth Wave Ladder Jig and Sine Wave Jig for comparison showed that the recovery rate for operation of Saw-tooth Wave Ladder Jig is raised by Sn: Sn:3.01%, W:5.5%, Pb:1.63%, Zn:2.04%; The water consumption reduces 30%-40% with water consumption being decreased by 30-40%. The area reduces 1/3 and the stroke may adjust also.
Ore dressing of Saw-tooth Wave Ladder Jig is capable of handling almost full sizes of mineral materials other than very fine material. It features simple process operation, heavy duty equipment handling capacity with final products being obtained through one time separation. Therefore, it has found a wide application in production. It is regarded as one of major means to cope with metallic ores such as iron and manganese ores of coarse, moderate and fine sizes and has found significant use in beneficiation tin and tungsten ores. Moreover, Jigging Method also can achieve a good result in processing primary ores bearing gold, tantalum-niobium, titanium, zirconium and chrome and sand stones.
More Features:
Energy conversation, no pollution
Simple installation
The work safe and reliable, long working life
Specification:
Model | Chamber | Feeding Size mm | Water added m3 /T | Pressure of water Mpa | Processing capacity t/h | Motor power kw | Dimension
mm | Weight
Kg | |
shape | Area m2 | ||||||||
JT0.57-1 | Ladder | 0.57 | 6 | 1-3 | ≥0.5 | 1-2.5 | 1.5 | 1550×780×1530 | 610 |
JT1-1 | Ladder | 1.04 | 10 | 1-3 | 2-4 | 2.2 | 2270×1110×1890 | 900 | |
JT2-2 | Rect | 2.28 | 10 | 1-3 | 4-8 | 3 | 3225×1550×2050 | 1640 | |
JT3-1 | Ladder | 3.3 | 10 | 1-3 | ≥0.5 | 6-10 | 5.5 | 3180×2000×2600 | 3260 |
JT5-2 | Ladder | 4.86 | 10 | 1-3 | 10-15 | 7.5 | 3600×2000×2600 | 4500 | |
JT1.5-2 | Rect | 1.53 | 30 | 1-2 | ≥0.5 | 5-8 | 3 | 3200×1550×2050 | 1520 |
JT4-2 | Rect | 4.33 | 30 | 1-2 | 10-15 | 7.5 | 3600×1850×2600 | 4600 | |




