Metallurgy, Mineral & Energy
XD Series Continuous Spring Tempering Furnace
2016-11-01 22:16  Views:141
Price:Negotiable
Send Inquiry

XD Series Continous Spring Tempering Furnace

 

Feature

 

  • XD Series of Continuous Heat Treatment Furnace is the heat treatment device for the machinery spring and it is very popular among the customers.
  • Its characteristic is using imported electrical components and smoothly speed regulator.
  • It is energy-saving (can save until 30% less compared with similar installation), fast temperature built-up (for less than 20 minutes to reach the set-up value of temperature).
  • It has a uniform and stable temperature field in the furnace, highly précised automatic control.
  • It is convenient for continuous work with a very good reliability.

 

Operating mechanism maintenance

  • Turn off the power.
  • In the use cotton fabric cleaning organization and the radio station the thing, and spreads guards against rust the thin oil.
  • Slide precision slide object, do not use high-viscous oil, using only the slide oil lubrication, so as not to affect the linear movement of the slide.  
  • Every six months separately to organization on 1-4 Yellow glib increase bearing grease.
  • Note: Do not use the air spray gun cleaning song hand and slide, in order to avoid the debris, dust and slide chute or the clearance of the rotary structure.

 

Gear-driven lubrication system

 

Gears lubrication of the system is divided into x and y axes, and the oil tank is just touching the tooth surface. Oil is not much more, so as to avoid motor oil and fuel tank for 6 months to check 1 times
Every six months, the replacement cycle oil maintenance, and implemented in accordance with the following steps:
Note: The new machine using the full 1000 hours, please be sure to update the new cycle oil.

 

Wire feeding system

To maintain the cleanliness of feeding servo motor to prevent oil and gas, and dust fall into the servo motor or encoder, resulting in mechanical damage.
At least every six months for maintenance or in accordance with the number of machine production, and replace the line feed operation at the same time.
Implementation of machine maintenance jobs, follow these steps:

  • Make sure the power is turned off.
  • Wipe the parts with cotton cloth, wire feed wheel, sending Line Block, delivers the spindle and other metal surfaces, removal of the mechanical surface debris, oil, grease, dust, and coated with a of antirust thin oil to prevent mechanical corrosion.
    With the cotton swab to remove the old grease and oil stains on the wire feed drive gear.
  • The transmission tooth gear train gear contact face spreads the gear special-purpose oil lubrication.(Uses OMEGA73 or same level lubricating oil)
    Attention: Please do not use the air spray gun to be clean, in order to avoid the detritus, the dust fall the slide rails sliding way or in the rotation structure gap

 

Contact Infomation
Send Inquiry
Company name:Dongguan Xinding Mechanical Equipment Co., Ltd.
Status:[Offline] [Send message] [Chat]
Business contact:weihong xu(Mr.)
Telphone:
Mobile:
Fax:
Area: Caribbean Region-Bermuda
Address:dongguan xin ding machine Co.Ltd