Model:TRNC - 125
Send Inquiry
αCNC Rotary Table (5 Axis)
| SPECIFICATIONS----Model | aTRNC - 125 | ||
| Worktable diameter | ø125mm | ||
| Table height(horizontal position) | 236mm | ||
| Overall height(vertical position) | 260mm | ||
| Table center height(vertical position) | 150mm | ||
| Center bore diameter | ø25H7 mm | ||
| Spindle hole diameter | ø25 mm | ||
| Width of T-slot | 12H7 mm | ||
| Width of Guide-block | 14h7 mm | ||
| Servo motor (FANUC) | Rotary | Inclination | |
| α2/3000 | α2/3000 | ||
| Servo motor(mitsubishi) | HA-33NT | HA-33NT | |
| Total seed reduction ratio | 1:90 | 1:180 | |
| Minimum input increment | 0.001o | ||
| Table rotation speed | 33.3r.p.m | 16.6r.p.m | |
| load capacity | 0 tilting angle | 50kg | |
| 0 ~90 tilting angle | 35kg | ||
| Allowable turntable torque | 8kg.m | ||
| Max.diameter of workpiece | 125mm | ||
| Clamping torque(pneumatic pressure 5kg/cm) | 8.5kg.m | 12kg.m | |
| Rotation axis | indexing accuracy | 40" | |
| repeatability | 4" | ||
| Inclination axis | indexing accuracy | 60" | |
| repeatability | 4" | ||
| tilting angle | - 40o ~ +120o | ||
| Net weight | 140kg | ||



