Model:DT-10
Waste tire pyrolysis plant mobile:+86 13733931733
our equipments have three links:
The first link is making the crude oil.
The second link is making the diesel through the fractionation.
The last link is the color and odor removal.through these three links,you can get good quality oil.
1. Overview of pyrolysis plant
The whole pyrolysis system is composed by 13 parts, which are reactor ,transmission device, catalytic chamber, cooling tube, heavy tank ,oil-water separator,condenser,light oil tank, safety device, vacuum system,dedusting system, draft fan,chimmey.
Cooling systems decides oil output. There are two steps for cooling. Cooling pipe is the first step. The second is condenser. We have three condensers. And there are 57 pipes in one condenser. Diameter is 48mm for one small pipe. The heat exchanging area is about 13square meters for one condenser. So the total cooling area is about 40 square meters, which will guarantee you a high oil yield.
2.working process:
Firstly ,put the raw material into the furnace and seal the feed inlet system.
secondly,burn the fuel material(coal,wood,or natural gas ,oil ) in the combustion system .the reactor will slowly heat ,when the temperature reach around 250 degree celsius,it will produce oil gas .
oil gas will be processed by our technology ,then gone to cooling system to become liquid oil.
the gas which cannot liquid under normal pressure , will be flow back to combustion system to instead the fuel which heat the reactor, it can save energy too much .
after finishing oil produce ,the temperature of reactor will go down ,in the same time ,carbon black will be discharged automatically.
Lastly,when the temperature fall to 100 degree celsius,worker could open the door of reactor to discharge of steel wire, then can start another batch working.
Items | Contents | ||
Raw material | Waste tires, scrap plastic, waste rubber | ||
Structure form | Horizontal | ||
Model | DT-6T | DT-8T | DT-10T |
Size of reactor | D2200mm*L6000mm | D2600mm*L6000mm | D2600mm*L6600mm |
24-hour capacity | 6 tones | 8 tones | 10 tones |
Operating pressure | Constant pressure | ||
Heating material | Coal, charcoal, fuel gas, fuel oil | ||
Average out-put oil rate | 45%-50% | ||
Material of reactor | Q245R/Q345R boiler plate | ||
Thickness of reactor | 16mm | ||
Rotate speed of reactor | 0.8 turn/minute | ||
Mode of cooling | Water cooling | ||
Working mode | Continuous feeding | ||
Delivery time | 10 days after receiving deposit | ||
Payment term | T/T, 30% in advance, balance paid before shipment | ||




