Model:SQ-11
5 liter hydraulic bottle blowing machine
System | Item | Unit | Basic Parameters |
Basic Parameters | Plastic fit for |
| PE/PP |
Max hollow product volume | L | 1-5 | |
Diehead am ount | SET | 1-2 | |
Size(LxWxH) | M | 3.6*2.5*2.4 | |
Weight | TON | 5 | |
| Clamping Force | KN | 120 |
Template Distance | MM | 220--620 | |
Template Stroke |
| 400 | |
Max template size(WxH) | MM | 480*500 | |
Mould thickness | MM | 225--300 | |
Extrusion System | Two screw diameter | MM | 80 |
Screw L/D ratio | L/D | 28:1 | |
(HDPE)Plasticizing capacity (HDPE) | KG/H | 80 | |
Screw heating zone | ZONE | 4 | |
Screw heating power | KW | 18.5 | |
Screw fan's power | KW | 0.56 | |
Extrusion motor's power | KW | 22 | |
Die head | Diehead heating zone | zone | 2 |
Diehead heating power | kw | 13.5 | |
Sprue-die dia(max) | mm | 180 | |
Power | General Power | kw | 65.7 |
Oil-pump motor power | kw | 11 | |
air pressure | mpa | 0.6--0.8 | |
Average power | kw | 35 | |
Compressed air dosage | m³/min | 1.5--2.5 | |
Cooling water dosage | L/min | 3--5 |
