| R2y round PU injection machine for end-caps |
Introduction Continuous production line for PU filter end caps is a kind of specialized equipment used to produce rigid and half-rigid round PU filter end caps. Its operation principle is as follows: Two components of liquid materials are delivered in a certain ratio by metering pump to the mxing head for agitation. A round worktable is designed to put a mound for injection while rotating. Foam in the mould reacts and gets hard into shape. Constituents of the equipment This machine is consist of mixing head, material tanks, pump unit, heating water tank, cleaning solution tank, frame, electric cabinet and a single turn table. Main technical parameters: Throughout According to the process of proportioning Pump speed 60~480 r/min Mixing head speed 2800~4500 r/min Material pressure 0~0.6Mpa Temperature control 0~50°C Power of whole machine 9.5~12.4kw, electric heaters 6kw Weight about 800kg |
Rxy round PU injection machine for end-caps
Introduction
Continuous production line for PU filter end caps is a kind of specialized equipment used to produce rigid and half-rigid PU filter end caps. Its operation principle is as follows:Two components of liquid materials are delivered in a certain ratio by a metering pump into mixing head for agitation. A NC worktable is given so that the mould can automatically move along the pre-programmed locus. Foam in the mould reacts and gets hard into shape.
With features of precise metering, uniform mixing and digital display and operation controlled by microcomputer, it can be adjusted as per technical requirements without stopping production.
Constituents of the equipment
This machine is consist of mixing head, material tanks, pump unit, heating water tank, cleaning solution tank, frame and electric cabinet. ETN200 Two dimensional numerical control mobile platform control system is settled on the electric cabinet.
Main technical parameters:
Throughout According to the process of proportioning
Pump speed 60~480 r/min
Mixing head speed 2800~4500 r/min
Material pressure 0~0.6Mpa
Temperature control 0~50°C
Power of whole machine 9.5~12.4kw, electric heaters 6kw
Weight about 800kg
Computer control 20 moulds



