Model:RDC-Y-6
Technical Parameter
Semi-automatic Laminator | ||||
Equipment overview | Type | RDCY6 | Laminating area | 2.2m×2.2m |
Dimension | 2.5m×2.83 m×1.35m | Weight | 7.5T | |
Power supply | 380V 3 phase 4wire | Peak power | 39KW | |
Pumping speed | 70L/S | Work power | 27KW | |
Control mode | Automatic/ Manual | Ultimate vacuum | 20PA | |
Heating mode | SD320 Heat by oil | Temperature control mode | Japanese Yokogawa three chip PID Control | |
Maximum temperature | 180 | Temperature uniformity | ±1.5, Multi-point temperature control | |
Work temperature | 100∼160 | Controllable temperature precise | ≤±0.8(at the regulated set temperature value | |
Unevenness of the worktable | Unevenness ≤200μm/m2 | Air discharge speed | Can adjust continuously within 0∼50L/S | |
Press of compressed air | 0.50.8MPa | Flow volume of compressed air | 420800L/S | |
Pumping time | 57 min | Laminating time | 20 | |
Work vacuum degree | 80∼20Pa | Height of Laminating cavity | 40mm | |
Cylinder Stroke length | 360mm | Rubber board | Adopt nonhazardous high temperature resist rubber board | |
Main parts | Controller PLC | Japanese Yokogawa | Magnetic valve | Japanese SMC |
Relay | OMRON or SCHNEIDER | Cylinder | AIRTAC from Taiwan | |
Vacuum Pump | Shanghai Laibo vacuum pump factory | Touch screen | Quanyi Electric Company from Taiwan | |
Exclusive use rubber board | Shanghai Xiaochao Industrial Co., Ltd. | Heating pump | Fuxin Hongda thermotechnical Manufacturing Co., Ltd. | |




