The furan resin for casting produced by our factory has a complete category, which has acid hardening self-hardening sand adhesive under normal temperature and thermal setting adhesive. This product is charactenzed BV low free fo rmalde_hyde content, small odor, high adhesive strength, good collapsibility, accurate sand mold(core)size and highly polishedcasting surface, etc. This product with excellent performance is applicable to various casting steel, casting iron and nonferrous metal coring and molding of muIling sand production lines for casting and manual mulling sand process.
Instruction
The added amount of resin is generally 0.9%-1.5%of the sand weight depending on the category of the sand; Since the particle shape acid amount, mud content and water content, etc. Of particles of the raw sand act relatively greater influence to the application effect of the resin, raw sand of appropriate model shall be adopted.
Both natural environment and relative tempe rature of the atmosphere will give a certain influence to the use of the resin, therefore, the amount of the curing agent shall be adopted approp riately according to the environment and the temperature of the sand.
The relative strength of the resin call be effectively improved by the silane coupling agent which is generally applied to the resin by the using unit prior to use The adding amount accounts for 0.2%-0.3%of the resin weight in general, and the service life in optimum shall be around one week.
The resin shall be kept in a coll and dry place: It shall be protected against insolation for a long time or getting close to thermal source: Also pay attention to prevent acid substances getting into the product so as to avoid invalidation. Never directly mix the product with acid substances, othe rwise acute exothermic reaction will occur and accidents be caused.
Name of index Index requirement
Appearance Brownish-black thick body
Specific gravity is not less than 1.18
Viscosity 20oC 20-30
Model and performance on furan resin for foundry use
Type Seil-hardening sand resin Thermosetting resin Furfuryl resin
Name Index Model FH-1 FH-2 FH-3 New Generation FH-4B FH-5 TypeIof furfuryl alcohol TypeIIof furfuryl alcohol Acetone insolution ≤ 0.05
Appearance Reddish brown Reddish brown Reddish brown Reddish brown Yellowish brown Chocolate brown Reddish brown
Nitrogen content %≤ 0 0.6 2.0 2.6 5.0 5.0 0
Free formaldehyde %≤ 0.2 0.2 0.2 0.1 1.0 1.0 1.0
Viscosity Pas≤ 15x10-3 15x10-3 15x10-3 20x10-3 30x10-3 1000x10-3 1000x10-3 Water content ≤ 0.05
pH value 6.5-7.0 6.5-7.0 6.5-7.0 6.5-7.0 6.5-7.0 6.5-7.0 6.5-7.0
Dendity D2020g/cm3 1.10-1.20 1.10-1.20 1.10-1.20 1.10-1.20 1.10-1.20 1.10-1.20
Tensile strength Mpa≥ 1.8 1.8 1.6 2.3 1.6 2.8 1.8 Specific gravity ≥ 1.22
Shelf life A year A year A year A year A year Half a year Half a year
Purpoee Heavy cast steel, alloy steel Heavy cast steel, alloy steel Cast steel, heavy cast iron Large lron castings, nodular castiron ferous alloy Steel Castings Iron castings, non-ferrous metal Cast steel alloy steel
Physical mechanical performance of YJ furan solution
Ltems Series porducts Glass Daub Mortar Concrete
Capacity(hg/m3) 1700 -2000 -2200 -2450
Compressive strength(Mpa) - 70 60 50
Tensile strength(Mpa) 80 6.0 60 5.10
Adhesive strengnth with ceramic tile -140 1.5 - -
Rupture strength(Mpa) 14.8



