Model:ndmotor
Production process under QC system of ISO 9001: 2002 and TS16949: 2002
Grade Available:N35, N38, N40, N42, N45, N48, N50, N52 working temperature: 80 centidegree30M, 33M, 35M, 38M, 40M, 42M, 45M, 50M working temperature: 100 centidegree30H, 33H, 35H, 38H, 40H, 42H, 45H, 48H working temperature: 120 centidegree30SH, 33SH, 35SH, 38SH, 40SH, 42SH, 45SH working temperature: 150 centidegree 28UH, 30UH, 33UH, 35UH, 38UH, 40UH working temperature: 180 centidegree28EH, 30EH, 33EH, 35EH, 38EH working temperature: 200 centidegree 30AH,33AH working temperature: 230 centidegreeMotor magnets is usually Arc or Block shapeDimension Describe: Arc:Outer Diameter, Inner Diameter, Degree of Angle, Length, Width, Tolerance, Edge degree, etc. Arc magnets is usually customized deisgn.Block: Length X Wildth X Thickness, Tolerance, Edge degree, etc.
Typical Coat: Ni, Ni-Cu-Ni, Zn, Tin, Epoxy, Ni-Ag, Ni-Au, etc.
Applications: Motor and Generators, VCM, etc.
Key Features of Acemade NdFeB Magnets
Sintered NdFeB are formed by powder metallurgical processes. The magnetic performance of all grades is optimized by applying a magnetic field during the pressing operation, thus producing a preferred direction of magnetization (anisotropy). Our sintered NdFeB magnets have 4 distinct characteristics: High corrosion resistance and Low temperature coefficient, Large dimensions or Small sizes. The newly developed L-T Sintered NdFeB Series has outstanding corrosion resistance and high working temperature compared to the normal grades.
Key Benefits
• The strongest magnets in the world. They can lift up to 1000 times their own weight.
• Far better permanent magnetic performance compared with traditional magnets, but the price is relatively low. (by weight about 20times Ferrite magnet, by dollars per BHmax about 1.5 times Ferrite magnet)
• Wide range of grades with new ones regularly being developed.
• Available from very small sizes to large blocks.
• Relatively easy to machine, compare to AlNiCo and Smco magnets
• High resistance to demagnetization.
Key Challenge
• Brittle and hard.
• Properties deteriorate rapidly at temperatures in excess of about 1500C (depending on grade and permeance coefficient magnet is operating at) The highest working temperature can be 2300C (AH grade L-T Series).
• Need to be protected against oxidation—by coating or plating the magnets.
Quick Facts
Density: 7.6g/cm3
Saturation magnetizing field required: about 25KOe
Shape Available: blocks, bars, discs, rings, arc segments, etc.
Grade Available:N35 to N53,N,M,H,SH,UH,EH, AH series
Size: the largest can be 150mmx150mmx50mm, the smallest can be 2.00mmx1.50mmx0.50mm for the block shape.
Machine: Neodymium magnets should be machined by grinding using diamond wheels. However, of the hard magnets materials, neo magnets are the least difficult to machine




