Model:ZX-D2
ZX-CP200 Laptop , infrared rework station
Features:
1 . With PLC user interface design
2 . Three independent temperature zone control, more accurate;
3. The first , second temperature heater using good material, can accurately regulate hot air flow and temperature , high temperature generated breeze, third zone with far infrared temperature heating plate to preheat.
4. The first, second and third-zone with 9 segment temperature up (down)+9 segment constant temperature control, can store 40 groups temperature curve;
5. First-, second-zone with over temperature protection design;
6. After remove and soldering, using high-volume fan to cool the PCB board, prevent deformation of PCB board and ensure the effect of welding;
7. The first temperature zone can be front and back, up and down adjustment and 360-degree rotation, convenient to operate;
8. The second temperature can adjust according to different PCB board appearance and components, prevent collision with PCB lower plate components;
9. The third zone can be moved right and left, suitable to repair large BGA,CBGA and BGA in partial side of PCB board;
10. Equipped with a variety size of hot-air nozzle, or made according to special requirements, free rotation of hot air nozzles;
11. Adjustable PCB jaw, to prevent collision with the components;
12. Adjustable high-temperature resistance bracket, position rack designed to protect against hot;
13. After BGA remove and soldering have voice alarm function;
14. Hand-held vacuum suction pen take BGA, convenient reliable and durable ;
15. With special pallet tool, suitable for different motherboard of laptop computer.
SPECIFICATION
PCB Size | ≤L530×W425mm |
PCB Thickness | 0.5~3mm |
Temperature Control | K thermocouple PID Closed loop |
PCB Positioning mode | Outer |
Bottom preheat | Infrared 2400W |
Main (Top+bottom) heater | Hot air 800W+800W |
Power supply | Single phase 220V,50/60Hz,4.0KVA |
Dimension | L650*W700*H550mm |
Weight | Approx. 70kgs |




