Model:HNR-HP400 / MHP400(MG)
Send Inquiry
| - | A stable casting condition is made by PLC computer system and a powerful locking force is created by faster forming speed |
| - | Automatic creation of Low speed-High speed- pressure intensification |
| - | Increased productivity by much faster cycle times |
| - | Pre distinguish between good condition and defectiveness of products by applying of Self-Diagnosis (check up) monitoring system |
| - | Ejector system It is easy to exchange ejector’s pin by installing of ejector guide bar in the diagonal and it prevents to incline symmetrically |
| - | “HNB” Plunger Pump It is possible to clean the inside of Plunger sleeve on the die-casting machine and to use a lubricant |
| - | Toggle system The structure of Toggle link housing is in dome type for preventing deflection of cross head guide bar & reinforcing the durability of the housing and the intensity of Toggle link is increased much more |
| Specification | Unit | HP400 | |
Die Close | Locking Force | ton | 400 |
| Size of Die Platen | mm | 1034 × 1034 | |
| Space between Tie Bars | mm | 670 × 670 | |
| Tie-Bar diameter | mm | 130 | |
| Max. Die thickness | mm | 700 | |
| Min. Die thickness | mm | 300 | |
| Die stroke | mm | 420 | |
| Injection | Maximal injection force | ton | 34 |
| Plunger stroke | mm | 480 | |
| Tip projection | mm | 165 | |
| Injection port position | mm | -150 | |
| Injection speed | m/sec | 0.1 ~ 5.0 | |
| Tip diameter | mm | 60~80 | |
| Sleeve length | mm | 247 | |
| Ejection | Ejection force | ton | 19 |
| Ejection stroke | mm | 90 | |
| Hydraulic | Moving core valve | 3/8″×1 | |
| Moving core ports | 3/4″×4 set | ||
| Hydraulic system pressure | Mpa | 15 | |
| Required hydraulic oil quantity | liter | 430 | |
| hydraulic tank capacity | liter | 330 | |
| Cooling water | Required cooling water(for oil cooller) | liter/min | 35 |
| Required cooling water(for die) | liter/min | 70~120 | |
| For hydraulic pump | kw | 30 | |
| Electrical | For lubrication pump | w | 40 |
| Electrical capacity | KVA | 50 | |
| Required floor space | mm | 5802×1830 | |
| Size | Machine height | mm | 3100 |
| Machine mass | ton | 13 | |




