Shoe mould silica gel
Properties and use:
This series product is condensation type of two-component materials, is made up of A agent and B agent two components of the composition. With good fluidity, high-temperature resistance, corrosion resistance, and sexual tensile and high strength, the anti-peel little shrinkage, turn mould frequency higher. Can be widely used in bo li resin, epoxy resin, PU PU foaming resin molding products of adornment and handicraft replication.
The mian technique parametion:
Shoes mold adhesive series model RTV-2-108 RTV-2-208 RTV-2-308
Vulcanization former appearance white white gray
Iscosity (Mpa. S) 1.5~2 1.8~2 1.5`2
Storage period 2 3 2
Curing conditions (temperature vulcanization ) 25 25 25
Vulcanization formulations number 21# 21# 21#
Sulfurization agent quantity 2% 2% 2%
Working temperature() 25 25 25
Vulcanization after gel time (min) 10 10 10
Curing time ( min) 30 30 30
ShaoEr A hardness (c) 10 ~ 12 10 ~ 12 10 ~ 12
Resistance to tear strength (N/mm) 8~10 7~9 8~10
Tensile strength (Mpa) 24~26 18~20 22~24
Method of use:
1, says take a certain amount of silica gel, then click silica gel amount of 2-3% add hardener, and do it currently in use now match, in a short time, must be used up.
2. Will add hardener of compound fully mixing, again will melt in vacuum box smoke 3-5 minutes, exhaust bubble after can mould-making.
3. This series product vulcanization speed and environmental temperature, humidity has close relationship, the higher the temperature, humidity, the greater the sulfurization faster. Users can choose according to the weather conditions, curing agent, adjust curing agent, thus obtains appropriate dosage of sulfide speed.
Packaging, storage and matters needing attention:
1. This series product base gum with 200kg, 25 kg, packaging, curing agent by 0.75 L/plastic packing.
2 this series product should be sealed storage, and in a cool dark place, prevent the rain, and the sun blazed.
3. This series product storage period is half a year, if has the viscosity increases phenomenon, stir and used again, performance remains unchanged.
4. Copy type for glass, ceramics, resin, wood products or coated with paint, prototype surface surfactants used (such as detergent, shampoo or soap water) evenly over again, stay moisture volatilizes after reperfusion or brush besmear silicone rubber, be helpful for better demoulding.
5. This product series for the dangerous goods, but must pay attention in use process, avoid curing agent contact with skin and eyes. once the contact, immediately with right amount of detergent and water cleaning, such as splash into the eyes, with flowing water cleaning at least 15 minutes, and consult a physician.



