Model:TM2560C
Features:
High speed: It takes less than 2 minutes from the highlight and ordinary pieces are putted into the machine to finish. The speed of TM2560Cis 2 to 4 times than that of common positive-negative laminating press.
Good effect: The effect is up to international standards. The features are clear line of groove, non-open side, no bubble, no chromatic aberration and strong adhesive strength of the highlight piece surface after laminating with common membrane.
Low energy: The heating power is 18KW, half of equipments of other fellows; starting power of main heating is 15KW; average power consumption is 5KW∕h.
High configuration: The key components adopt original parts fromGermany,Japan, andTaiwan. Its features are high configuration and stability performance.
Hard Configuration:
frame | Cut from the whole steel plate |
Cylinder diameter | 220mm |
Cylinder structure | solid |
Cylinder stoker | 200mm |
Hydraulic system | Taiwan |
Heating | Electric heating, nano technology |
Vacuum pump | import |
Technical Speciation:
Exterior size | 11200*2480*2150(mm) |
Working plate size | 2560*1270(mm) |
Maximum machining height | 50(mm) |
Rated operating pressure | Positive pressure≤0.6Mpa Negative pressure≥-0.095Mpa |
Total power | 25KW |
Actual power consumption | about 8KW |
Total Weight | 16T |
Power supply | 380V 50HZ |


