Model:SRC-200SA
Machine Model | SRC-200SA | |
Cooling | Air | |
Inlet state | <=Ambient temperature Inlet pressure1.013bar(A) | |
Maximum working pressure Displacement | 27.7/7 | |
26.5/8 | ||
22.5/1.0 | ||
20.0/13 | ||
Power | 160 | |
Speed | 2980 | |
Voltage(v)Frequency(Hz) | 380V50Hz | |
Starting method | Direct start | |
Noise dB(A)Noise | 70 | |
Oil content of the exhaust | 1~3ppm | |
Outlet air temperature | Ambient temperature+8°C | |
Cooling air flow(m3/min) | 80 | |
Cooling water(m3/h) |
| |
Interface diameter(inch) | DN90 | |
Weight(kg) | 3200 | |
Dimensions | Long | 2500 |
Wide | 1530 | |
High | 1900 | |
200HP Rotary Screw Air Compressor
Standard Features
- The most advanced 5:6 profile rotors are used in the air-end; the rotors’ length/diameter ratio is 1.6:1, which enables the air-end to produce more compressed air at a lower RPM.
- Heavy load bearing=longer estimated life
- Large oil/air-cooled after-cooler is great for high temperature environments
- High precision oil separators make for low pressure loss and low pressure drop
- Advanced suction valve (The life time of the solenoid valve is more than 2,000,000 uses)
- Heavy duty air filter element creates high efficiency and low pressure loss
- Synthetic oil/lubricant
- Belt Driven/ Driect Driven
- Spin on oil filter element
- 2 stage filtration (External cabinet filter & 10 micron intake filter element)
- Easy access to preventative maintenance parts
- Adjustable motor slide base
- Isolation valve on discharge air line
- Wye-Delta Starting
- Load/No Load Control with Timed Shutdown
- Frequent Start/Stop Protection
- Wired for 380/3/50 or 415/3/50 volt operation
Intelligent PLC Controller
- The intelligent PLC controller offers digital displays of the following:
- Pressure
- Temperature
- Full Load Running Amps
- Maintenance Indicators
- Visual Alarms
- Start/Stop Push Buttons
- Emergency Stop
- Schneider Electrical Components




