Model:MJK6230D
computerised CNC wood cutting machine
NEW&HIGH-TECH PRODUCT
TORCH PROGRAME PRODUCT
Description:
The cnc panel sizing machine works for large amount of precise cutting.
It can be used for cutting several pieces of wood panel at presupposed width and thickness automaticly and continuously.
Machine stability to avoid after-sale maintain problem.
Parameter:
| max. cuttingh length | 3050mm |
| max. extent height of main saw | 85mm |
| main saw diameter | 350mm |
| main spindle diameter | 30mm |
| main spindle speed | 5000rpm |
| main saw motor power | 13kw, 2P |
| scoring saw diameter | 170mm |
| scoring spindle diameter | 30mm |
| scoring spindle speed | 6500rpm |
| scoring spindle motor power | 1.5kw, 2P |
| saw carriage motor power | 3kw |
| feed motor power | 1kw |
| saw carriage moving speed | 0-60m/min |
| material feed speed | 0-30m/min |
| Working Condition | |
| power supply | AC380V |
| air pressure | 0.6-0.8mpa |
| machine size | 5630*5780*1700mm |
| net weight | about 3200kg |
Devices:
1. Driving with chain to prevent cutting from slipping away under heavy load.
2. Double-side push device ensures preciseness of cutting for narrow board.
3. import control and driving device are precise and durable
4. Floating clamp-hand structure can protect piece from been damaged.
5.Autoadjusting extending height of saw patch according to cutting thickness, make the cutting effect of single
board better.
Working Process:
This machine is fully automatic: user just needs to input the data concerning workpiece thickness, length, width and required width, then the machine will take the workpiece into the machine by clamp hand, thus it will calculate how many pieces to cut and then start operation. After finish cutting, it will push the ready ones out, which enable user to carry them out. There is air sprayed out from the holes on worktable surface, thus user can easily carry the heavy board without burden.
High-quality assurance:
1.Enterprise authentication: ISO 9001
2.Material of machine body are made by "Baosteel" or "Wuhan steel and iron".
3.Main electric parts are "Schneider" brand.
4.Main spare parts are made by "pentahedron machining center",which is imported from Japan,
the process error is only about ±2μm.



