Network Switch specification:
Complies with IEEE 802.3, IEEE 802.3u standards
8 10/100Mbps Auto-Negotiation RJ45 ports supporting Auto-MDI/MDIX
Supports IEEE 802.3x flow control for Full Duplex mode and backpressure for half-duplex mode
Supports MAC address auto-learning and auto-aging
LED indicators for monitoring power, link, activity
Plastic case, desktop
External Power Adapter supply
Wireless router specification:
Complies with the IEEE 802.11b/g standards
High data rate up to 54Mbps network speed
Supports WDS (Wireless Distributed System) repeater mode
Supports AP client mode
Supports WPS (Wi-Fi Protected Setup) function
Supports hidden SSID function
Supports WMM function to meet the multimedia data bandwidth requirement
Supports 64/128-bit WEP, WPA, WPA2 wireless security
Obtain WAN IP by PPPoE/DHCP/static IP/PPTP
Integrated 10/100 Mbps LAN switch with Auto MDI/MDI-X support
Provides DHCP server
VPN pass through (L2TP/IPSec/PPTP)
Supports virtual server, port forwarding and DMZ(demilitarized zone)
Supports DDNS (dynamic DNS)
Integrated anti-DOS firewall
Provides MAC access control
Supports UPNP (Universal Plug and Play)
Supports system status (port connectivity) and remote log for network management
Supports web-based configuration
Firmware upgradeable via web browser
RJ45 Modular Jack specification:
Detailed Description
· Electrical
1. Current rating: 1.5MPS
2. Voltage rating: 125V AC
3. Insulation resistance: ≥1000mΩ
4. Withstanding voltage: AC 1000V RMS 50Hz or 60Hz 1Min
5. Contact resistance: ≤30mΩ
· Machanical
1. Mating force: 5~25N
2. Retention strength: ≥76N
3. Durability≥750 TIMES
· Material
1. Housing: PA66 filled with fiberglass
2. Inside chip: PA66 filled with fiberglass
3. Shielding: 0.2mm thickness copper alloy with nickel plated.
4. Contact: Phosphor bronze, hard gold plated over nickel.
5. Gold plating: <3μ inch,3μ inch,6μ inch,15μ inch,30μ inch,50μ inch.
Working Temperature:
-40 degree centigrade-+70 degree centigrade
