Model:XJFS280-C
1,Working principle
XJFS280-C type/XJFS300 type rubber fine grinding mill consists of feed system, cutter disc, main motor, motor base, air duct,collector,electric cabinet and unloading machine ect.Put the materials required to be crushed in the feed hopper at the top of the feed system and then sent by the feed screw continuously and uniformly to the cutter disc; and then the cutter disk will be driven to rotate by the main motor to crush the material;then finally the crushed materials is sucked by the negative pressure air flow(cleanliness of the working environment to be ensured) to the unloading machine for discharge;
2, Performance characteristics
The equipment features easy and convenient operation. the equipment may be ensured of continuous operation long time at room temperature to produce fine rubber powder meeting the requirement. Through adjusting the gap between the cutter disc during the production, you can get the final product of the required fineness. The cutter disc has the function of self-locking and the temperature of the cutter disc and the service current of the main equipment many be digital displayed on the panel of the electrical control cabinet. In case of failure of any one of the equipments, the control system will automatically give alarming signal and stop the failure equipment automatically for problem-solving. The equipment is a kind of new-type satisfactory equipment used in reclaimed rubber industry featuring small size, low power consumption, less construction cost, environment friendliness and cleanliness etc.
3,Process flow disagram
3,Technical data
Grain size of feed material | 10-20 mesh |
|
|
Grain size of output material | 30-120 mesh | Material feed motor | 0.75kw*4sets |
Production capacity per unit | 50-150kg/h | Motor of main equipment | 30kw*4sets |
Cooling water consumption per unit | 5t/h | Blower motor of collector | 7.5kw*1sets |
Outline dimension per unit (mm) | 1750*1280*1400 | Motor of unloading machine | 0.75kw*1sets |




