Model:HPM40P,HPM40
Main Technical Parameter
* Type: HPM40;
* Suitable foaming system: rigid foam, half-rigid foam,
* Suitable material viscosity 22 degree Centigrade:
Polyol: max. 1500 mPa.s,
Isocyanate: max. 1000 mPa.s
* The flow capacity ranges: 100~ 600g/s,
* Mixing ratio range adjustable 5:1 ~ 1:5
* Pouring programming time: 0.50~99.99sec
* Water supply required: processed running water, flow capacity: 300L/min. Brings R1the ball valve;
* The compressed air supply required: 0.7 Mpa, flow capacity: 600NL/min. Dry, oil-less , the dew point -20 degree Centigrade; with the 1.0Mpa pressure relief valve and R3/4 " the ball valve;
* The nitrogen supply required (if needs): 0.7 Mpa, flow capacity: 600NL/min. With the 1.0Mpa pressure relief valve and R3/4 the ball valve;
* Power supply required: 3× 380V/50HZ±10% or as customer's local condition
* Control voltage: AC110V/DC24V;



