Model:ZC30D
ZC30D Injection blow molding machine.
Description of machine.
A). Adopt YUKEN valves & pumps, JINGHUA semi-computer controller & SIEMENS motor, FESTO air valve.
B). Applying in DUCTILE CAST IRON can bear high strength not deforming, plate smooth for horizontal injection.
C). Adopt single beam & double pillar design, which highly enlarge the rotation space for 180mm cosmetic bottles & large mould, also mould assembling & removing easier.
D). Applying in double assistant cylinder helpful to main injection cylinder, higher speed mould clamping/opening & save energy as well as providing stable clamping force.
E). Adopt two pumps, one is for hydraulic action & other for mould clamping, which guarantee the 400×300mm big mould required clamping force.
F). Applying in six-poles motor, lower noise & save energy
Specification of IBM products.
A). Neck part is made by injection providing the mouth & screw precision, can 100% matching cap, no any leakage.
B), No clamping line at bottom & clamping line at body side smooth for labeling. Bottle with balance wall thickness & No flash to save material.
C). Body & bottom with strong mechanical strength
NO. | Item | Unit | Data |
1 | Screw diameter | MM | 40 |
2 | Max. theoretical capacity | cm3 | 158 |
3 | Cylinder-heating power | KW | 6.5 |
4 | Heating zone | Zone | 3 |
5 | Clamping force of injection mold | KN | 300 |
6 | Opening stroke of injection mold | MM | 120 |
7 | Clamping force of blow mold | KN | 30 |
8 | Opening stroke of blow mold | MM | 120 |
9 | Idle time | S | 6 |
10 | Max. plate size of mold L×W | MM | 400×300 |
11 | Min. mold thickness | MM | 180 |
12 | Motor power | KW | 15 |
13 | Mold-heating power | KW | Tailor-made |
14 | Pressure of hydraulic system | MPA | 14 |
15 | Max. working pressure of compressed air | MPA | 1.2 |
16 | Discharge rate of compressed air | m3/min | ≥0.8 |
17 | Consumption of cooling water | m3/h | 3 |
18 | Dimension of machine (L×W×H) | MM | 3100×1100×2200 |
19 | Machine weight | T | 2.5 |
20 | Volume of formable products | L | 0.003-0.6 |
21 | Height of formable products | MM | ≤190 |
22 | Diameter of formable products | MM | ≤100 |
23 | Conveyer belt of motor power | KW | 0.37 |
24 | Total power | KW | 22.5 |
