Model:DS90
Send Inquiry
Injection Mould Machine's technical parameter is
| Description | UNIT | DS90 | ||
| A | B | C | ||
| Shot volume | cm3 | 120 | 163 | 212 |
| Shot weight(ps) | g/oz | 113/4 | 153/5.4 | 199/7 |
| Screw diameter | mm | 30 | 35 | 40 |
| injection pressure | mpa | 209 | 153 | 117 |
| Screw I/D ratio | 23:1 | 20.5:1 | 18:1 | |
| Screw stroke | mm | 170 | ||
| Screw speed(stepless) | rmp | 0-180 | ||
| Clamping force | KN | 900 | ||
| Opening stroke | mm | 320 | ||
| Platen size | mm×mm | 540×540 | ||
| Space between tie bars | mm×mm | 360×360 | ||
| Max.daylight | mm | 680 | ||
| Mold thickness(min-max) | mm | 130-360 | ||
| Hydraulic ejection stroke | mm | 100 | ||
| Hydraulic ejection force | KN | 28.5 | ||
| Ejector pin | 4+1 | |||
| Hydraulic system pressure | mpa | 14.5 | ||
| Punp motor | kw | 7.5 | ||
| Heating capacity | kw | 6.5 | ||
| Number of temp control zones | 4 | |||
| Oil tank capacity | L | 170 | ||
| Machine dimensions | m×m×m | 4.2×1.12×1.75 | ||
| Machine weight | kg | 3000 | ||
