1). Thickness: 0.18mm to 0.8mm
2). Width: 1000mm 1200mm 1250mm
3). Standard: JIS g3312
4). Steel grade: Sgcc
5). Zinc coating mass: 60g
PPGI specification:
Standard: Sgcc, JIS, g3312, GB/t1275, en
base material: Hot dipped galvanized steel coil
Paint coating: Normal polyester coating, fiuorocarbon coating and silicon modified coating
Thickness: 0.18 to 0.8mm
Size width: 800/914/1, 220/1, 250/1, 219 (usual: 1, 000 to 1, 200mm)
Zinc coat: 60g to 100g
Color: All ral colors to your demands
ID and weigth: 508 to 610mm, 3 to 12t
Your detailed inquiry will be highly appreciated, we are looking forward to your reply
Product description:
Pre-painted galvanized steel coil: Paint system consists of a steel substrate to which a super polyester pre-painted finish system is applied
The system is designed to provide protection against corrosion in areas where severe to very severe environmental conditions are experienced
Pre-painted steel product is suitable for a wide range of roll-formed roof and wall claddings, rainwater accessories and general buiding products
Composition:
Following pretreatment, a corrosion inhibitive primer, and top coat is applied to the outer surface and a corrosion inhibitive primer and a backer to the reverse side
These coatings are oven cured to provide color and corrosion performance
Gl product description
Standard: JIS, g3302, sgcc, ASTM, a653m-04CS, en10142, dx51d, GB/t2518
Size thickness: 0.18 to 0.8mm
Width: 914 to 1, 250mm
Zinc coat: 60 to 275g or 40 to 150g
Surface treatment: Mini/regular/big/zero spangle/chromate treatment/chromate-free
Packing: Fully seaworthy export packing.



