Model:TST-9022
Printing slotting die cutting machine
Machine funcation
1The feeding unit has air suction (or leading edge you can chose) in order to make the precise.
2The baffle are adjusted by the electricand also has the function to make the cardboard flap and the two ends tidy
3It has the air suction assistant system ,which makes the bend cardboard can go in smoothly
4It also has the interval feeding function which can be used in producingthe big carton
5Printing unit uses the precise steel ceramica anilox roll and havethespecial treament which maks it can stand the tear and wear and has a long service life
6The printing uses the flapping typle ,which makes the the cartonboard can touch the printing roll closly .It can have a beautiful printing and easy to operate
7The printing roll is adjusted by the precise 360 degree electric phase and easy to operate .It also has the foot switch and make the printing board firm easily
8The running is controlled by the PLC and also has the terminal showing screen which makes the operating easy
9Ceramica anilox roll has the auto lifting function and up and down in the order
10It is pneumatic inking and auto circulating using.It has the electricssensor and can auto counter
11The machine running uses the electric moving and pneumatic locking
Machine Spec.
Modle | TST-9022 |
Machine Spec.(mm) | 900 X 2200 |
The max. speed(sheet/minute) | 200 |
The max.width of passing(mm) | 2200 |
The max. printing size(mm) | 910 X 2050 |
The min. feeding size(mm) | 230 X 598 |
The max. feeding size(mm) | 1100 X 2200 |
The min. height of carton(mm) | 78 |
The height of the stardned printing board(mm) | 7.2 |
Power(KW) | 30 |
Producing power(KW) | 20 |
Auto stacking machine
Machine function
1The running is controlled by the PLC
2The receiving unit uses the pneumatic two-way control
3The sensor auto to control the lifting
4The running speed is the same pace of the main machine
5The max. stacking height is 1700mm




