Model:IADC code
Specialist in producing of whole-new rotary type tricone bit, combination reamer tricone bit of TCI tricone bit & steel teeth tricone bit in China.
1.TCI bits series:
1)Soft formation TCI tricone bits:
The soft formation TCI tricone bits are used to drill low compressive strength, very soft formations. This bit maximized to use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset, results in high bit penetration rates. The deep intermesh of cutter rows prevents bit bailing in sticky formations.
2)Medium formation TCI tricone bits:
The medium formation TCI tricone bits features aggressive chisel tungsten carbide inserts on the heel rows and inner rows. This design provides a fast drilling rate and added cutting structure durability in medium to medium hard for mations. The HSN rubber O-ring provides adequate sealing for bearing durability.
3)Hard formation TCI tricone bits:
The hard formation TCI tricone bits can be used to drill hard and abrasive formations. Wear resistance tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge. Maximum numbers of hemispherical shaped inserts are used in all rows to provide cutter durability and long life.
4)Medium hard formation TCI tricone bits:
The medium hard formation TCI tricone bits features robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added cutting structure durability in medium to medium hard formations. The HSN rubber O-ring provides adequate sealing for bearing durability.
2.Main features
Cutting Structure | High extension balling resistant cutting structure with forged teeth and self-sharpening tooth hardmetal for high penetration rates and long life in soft abrasive formations. | |
Bearing Package
| Traditional ball and roller bearing, utilizing thrust buttons for axial bearing loads, gives reliable performance under a variety of rotary speeds and loads. | |
Premium Hardfacing | The tooth surfaces are fortified with premium, high-density tungsten carbide hardfacing applied by oxy-acetylene welding for superior wear resistance. | |
Center Jet Nozzle | (feature) | A fourth interchangeable jet is installed in the center of the bit to reduce bit balling or provide extra flow capacity. (Available only in 8 3⁄8" bits and larger.) |
Forged Teeth | Challenger steel tooth bits 13"(349.2 mm) and smaller are manufactured with Varel’s exclusive forged tooth process. This innovative method provides stronger, more impact-resistant teeth when compared with milling because the metal flow lines from the forging process follow the tooth contours instead of being cut by machining. | |
3.Available sizes
3-3/5''(91.4mm) 4-1/8''(104.7mm) 5-1/4''(133.3mm) 5-7/8''(149.2mm) 6''(152.4mm) 7-1/8''(180.9mm) 7-1/2''(190.5mm) 8-1/2''(215.9mm) 9-1/2''(241.3mm) 10-1/2''(266.7mm) 11-1/8''(282.5mm)11-1/4''(285.7mm) 12-1/2''(317.5mm) 12-1/4''(311.1mm) 13-1/2''(342.9mm) 14-1/8''(358.7mm) 15-1/8''(384.1mm) 17-1/2''(444.5mm) 20''(508mm ) 26''(660.4mm) |
4. Available models
Milled Tooth Bits ( IADC) | 414 417 437 447 517 537 547 617 627 637 |
Steel Tooth Bits ( IADC) | 114 124 127 116 117 |
Please specify the following on enquiry,
Diameter
Bit body
IADC code
Number of blades
Main Cutter size
Thread Connection
Drilling formation
Send message to us in below form, we are ready to reply you in the earliest time




