Model:NR150
low air pressure dth hammer:
1. 10 years manufacturing experience;
2. Certificate: ISO9001:2008
3. Material: Carbide
NR Series dth hammer, a kind of valve-equipped Low-Air-Pressure hammer with a single piston, a plate valve and a central exhaust structure. The compressed air is adopted as the driving force. To prevent dust pollution and get a better performance, some high-pressure water may be added into the air for wet rock drilling.
Advantage:
1. the strong energy of single impact and the low energy consumption in rock crushing;
2. the weight ratio of piston and bit almost reaches 1:1 to provide long effective acting time, which leads to the improved efficiency in rock crushing and to extended service life of the drilling tool;
3. a good performance in central air exhaust and cuttings discharge, which reduces the repeated crushing of rock;
4. a check valve device is available to drill holes under water.
the NR Series dth hammer , an ideal drilling tool, is widely used in such industries relating to energy, transportation, metallurgy, building etc.
NR150 DTH Hammer Technical Data
Length (Less bit) | Weight (Less bit) | External diameter | Bit Shank | Hole Range | Connection Thread |
908mm | 69.00kg | Φ137mm | CIR150 | Φ155-Φ178 | T75*10*2.5 Box |
Working Pressure | Impact rate at 0.5Mpa | Recommended rotation speed | Air consumption | ||
0.5Mpa | 0.7Mpa | ||||
0.5-0.7Mpa | 13HZ | 25-40r/min | 15m³/min | 17m³/min | |
Item Description | Weight (kg) | Part Number |
1. Top Sub 2. valve Seal 3. Check Valve 4. Spring 5. Compression Buffer 6. “O”Ring 7. Valve cover 8. Guide Tube 9. Valve 10. Air Distributor 11. Internal Cylinder 12. Piston 13. External Cylinder 14. Guided Sleeve 15. Stop Ring 16. Drive Chuck 17. Drill Bit | 10.40 0.03 0.035 0.015 0.06 0.035 2.00 0.02 0.05 2.60 5.40 14.00 22.20 3.20 0.025 8.20 12.50 | NR15001 NR15002 NR15003 NR15004 NR15005 NR15006 NR15007 NR15008 NR15009 NR15010 NR15011 NR15012 NR15013 NR15014 NR15015 NR15016 NR15017 |




