Model:YRKS355~630
Y and YR are the basic series motor, the protection class is IP23, the cooling method is IC01. This may derive the motors with all different protection classes and cooling methods, e.g., YKS(air—water cooling), YQF(climate protection, YKK(air—air cooling), YRKS, YRQF and YRKK series of motors.
The motor employs the internationally popular box structure, and the frame and end cover is welded with steel plate featuring the good stiffness and light weight. After removing the protective cover (or cooler), we may observe and touch the inside of motor, which is convenient for installation and maintenance of motor. The stator employs the external pressing structure. The stator winding employs the F-level insulation material and anti-corona material. The fixing of winding terminals employs the reliable special binding process. The whole stator employs the vacuum pressure impregnation F-level solventless paint (VPI) for treatment. Thus, the motor has the excellent and reliable insulation performance and damp-proof and shock resistance.
The squirrel-cage rotor in this series of motor mostly adopts the cast aluminum rotor, and no breakage of rotor happened, so the operation is very reliable; the squirrel-cage copper bar rotor employs the advanced and reliable welding process, and receives the fixation treatment inside the slot. The wound rotor employs the F-level insulation material and uses the vacuum pressure impregnation F-level solventless paint (VPI) for treatment.
There are two models of bearings, i.e.,rolling bearing and sliding bearing. They are classified by the motor power size and rotating speed, and the protection class of basic model is IP44. If the motor has the high protection class, the protection class of bearing will be also improved accordingly.
The motor employs the rolling bearing structure has the oil filling and exhausting equipment without stopping the machine, and the special oil filling tools may be used for filling and exhausting the oil without stopping the machine.
The main outlet box employs the sealed structure, and the protection level is IP54. They are generally installed on the right side of motor (viewed from the shaft end), and they may also beinstalled on the left side based on the demands of users. The inlet holes of
outlet box may be switched to the upper, down, left and right directions. The box has the separate grounding terminals.




