LCD Cable
- Rated temperature: 60° C or 80C Rated voltage: 30V
- Shielded twisted pairs:
Twisted pairs each contain drain wire individually with Al-mylar shielded and polyester tape foil outside
- Stranding tinned copper conductor 30-28AWG
- Foamed PE insulation
- Drain wire:
Stranding tinned copper 30 AWG
Twisted pairs or single wire
Stranding tinned 28 or 20 AWG
SR-PVC or PE insulation
- Optional
Filler, polyester tape foil
- PVC jacketed
- Print legend UL20376 or UL 20379

- Electrical properties:
DC conductor resistance at 20C
30AWG: 376.96 ohm/KM (MAX)
28AWG: 237.25 ohm/KM (MAX)
30AWG shielded pairs differential impedance at TDR 100± 10 ohm
Mutual capacitance about 1/4 pf/ft
Timed delay about 1.34ms/ft

Application: LCD cable
Remarks: For transmission between monitor and the display interface, cables utilized for DVI are divided into 2 groups 1) For digital use ( by utilizing twisted pair signal wire ) 2) For analog use ( by utilizing RGB coaxial cable )

Monitor cable
- Rated temperature: 80° C Rated voltage: 30V
- Tinned copper stranded
- Cellular PE ( coax. )
- Color-coded semi rigid PVC ( hook-up wire )
- Tinned copper wire spiral or braided shield ( coax. )
- Tinned stranded copper drain wire
- Drain wire laid between aluminum mylar and braid
- Tinned or bare copper wire overall more than 85% coverage braided shield
- PVC jacketed
- Pass UL VW-1 vertical flame test

Electrical properties:
Conductor resistance: At 20C ( max)
28 AWG: 237.25 ohm/KM ( coax. )
30AWG: 93.250 ohm/KM (core. )
Impedance at 10 MHz, 75± 5ohm ( coax. )
Application: Computer monitor cable