Model:CHG
Send Inquiry
Manual Electrostatic Powder Spraying Gun
- System components: automatic powder spraying gun, electrostatic controller, powder absorption pump, a whole set of electric wire and air supply pipe.
- Build-in high voltage structure prevent shocking.
- Three times air supply makes sure powder being sprayed evenly and spray nozzle keeps clean all the time.
- Fluidization bed structure of powder bucket prevent powder from accumulating and getting block.
- Powder absorption pump uses two-times air make sure powder will be sprayed more evenly.
Parameters table of Manual powder spraying gun and static generator
No. | Item | Parameter |
1 | Voltage input | ~220V 50~60 Hz |
2 | Voltage output of static generator | DC24V |
3 | Voltage output of powder spraying gun | 0-100kV continuously tunable |
4 | Current output | ≤100μA |
5 | Polarity | negative |
6 | Spraying gun weight | 550g |
7 | Powder output | 0-400g tunable |
8 | Compressed air consumption | Max0.25Nm3/min |
9 | Powder bucket volume | 25kg |
10 | Pipeline length | 4m |
11 | Protection degree | IP54 |
12 | Equipment weight | 25kg |
