EASY CURE Curing Ovens . . . cure parts uniformly and completely without discoloration or dirt rejects. Cure oven heating systems gradually and steadily raise the part temperature from the ambient temperature before the parts enter the oven up to the oven set point temperature. once the parts reach the set point they will be maintained within 2 to 3% of this set point temperature from the top to the bottom of the parts for the remaining conveyor path in the oven.

Oven Construction
Our ovens are of a modular design using interlocking oven panels containing non-settling, non-combustible, non-asbestos type industrial insulation rated for 500ºF. These oven panels are supported by a substantial structural steel framework that is designed with an allowance to prevent uncontrolled expansion from repeated heat up and cool down cycles.

EASY CURE ovens are designed to suit all modes of heating options available. We design ovens with following heating options:

Electrical
Direct Gas-Fired
Indirect Gas-Fired (Natural Gas, LPG, coal-gas etc.)
Indirect Oil (Diesel) Fired
Electrical Infrared

The USP of our ovens lies in the fact we can provide any combination of heating options, so as to provide customer with alternative arrangement/s, to switch over instantly. For instance, the oven can be electrical cum gas-fired or electrical cum oil-fired, or gas-fired cum oil-fired or gas-fired cum electrical cum oil-fired.

Powder Curing Batch Oven Features

High Volume, Low Impingement, Uniform Airflow
Standard Combination Airflow
Uniform air distribution along the entire length of the work chamber provides quality cured finishes and optimum cure cycles
No Powder Blow-Off
Better Temperature Uniformity
Quicker Heating

Exclusive Watch Dog Oven Management System
Includes a digital process timer, which eliminates inconsistent cure times that can degrade the powder adhesion properties.

Fresh Air Filter
Replaceable filter provided to help eliminate contamination and maintain a clean work chamber; gas-fired models also include a combustion blower inlet filter.

Proportional Heat Control
Gas-fired ovens include a modulating gas valve and electrically heated ovens include an SSR or SCR, which provides accurate temperature control.

Premium Quality
Our workmanship and attention to detail are unsurpassed.

3-Year Warranty
Dependable. Standard walk-in batch ovens include our year limited warranty .

Lower Installation, Start-Up, & Maintenance Costs
All powder ovens are fully factory assembled, tested, adjusted, and must pass a 154 point quality inspection prior to shipment.

SALIENT FEATURES

Uniform heating across entire area of the oven

Quick & Fast Heating at desired temperature

Widest Option of Mode of Fuel - Gas (LPG/CNG/LNG/Coal-gas), HSD/LDO, Electricity

100% Safety in Operation on all types of heating

Comparative Less Consumption of Fuel

Convection/Direct/Indirect/Infrared Heating System

Trolley/Dryer/Batch/Conveyorised Option with conversion facility

Skin Temperature almost same as Room Temperature

Conversion in Mode of Heating at anytime i.e. from Electrical to LPG-fired or vice-versa etc.

Auto cut off with buzzing and indicating on all types of heating

Customized sizes designed to meet customers requirements