Technical characteristics
1)framed elastic compression structure, the plate is compressed by the spring, thus the interfaxe pressure is easy to set up, constant, equal, accurate, unaffected by the high emperature and the human factor, the different changes created by the heat expansion and the worker operation are absorbed by the spring, so the mechanism can work well through out the constand and the equal pressure.
2)door type with automatic surface pressure establishment, the active surface is the left or right gate type structure, divided into the fixed part and the moving part by the bottom and the slide gate, the carrier frame is locked tightly by the spring module, starts the hydraulic cylinder to push the slider to the working position, as soon as the surface pressure automatically established, simple to use, reasonable and scientific structure.
3)constant pressure transmission structure. When in working conditions. In traveling range the pressure transmitting point is established around the center of the nozzle hole constantly, does not change with the sliding. This pressure transmission structure is more reasonable, equal and safe.
4)spring insulated structure, the design had taken the high temperature to the elastic part influence in consideration, so it has used the unique heat insulation design and the reasonable spring arrangement, lets the spring far away from high temperature area, maximum limit reduces the heat load. And it has the air-coolled equipment, resulting in safer and more reliable, longer life.
5)the main body is the high intensity and anti-high temperatu material, so its service life is long.