Brand:Longdu
Brief introduction
This series are mainly gear, gear pump shaft, pump body, valve, shaft end seal.Gear after heat treatment with high hardness and strength, and shaft installed in the replaceable shaft sleeve.In all parts of the lubrication pump are pump work automatically to achieve using the output media
KCB series gear pump is applicable to transport not containing solid particles and fibers, non-corrosive, temperature is not higher than 80 ℃, the viscosity for 5 x 10-6 ~ 1.5 x 10~3 m2 / s (5~1500 CST) lubricating oil or other similar properties of lubricating oil liquid.
n Application scope
1. In the oil system can be used for transmission, booster pump;
2. In the fuel oil system can be used as a transport, pressure, jet fuel pump
3. In the hydraulic drive system can be used to provide hydraulic power of hydraulic pump;
4. In all industrial fields, all can be used as lubricating oil pump.
n Performance scope of KCB gear pump Temperature: below 180℃ Viscosity:5~1500cst
n Construction
1.This series are mainly gear oil pump gear, shaft, pump body, valve, shaft end seal of. Gear after heat treatment have higher hardness and strength, and with the shaft installed in the replaceable sleeve inside operation. All the parts in the pump will automatic reach lubrication by output medium when pump working.
2. In pump with design reasonable drainage and return chute, making gear in the work under the minimum torque force,so bearing load is small, little wear and tear, pump with high efficiency.
