Metallurgy, Mineral & Energy
Pool Heat Pump (PAC11N2)
2016-10-31 09:00  Views:283
Price:Negotiable
Send Inquiry

Advantages
(1)High efficiency Titanium condenser.
(2)Sensitive and accurate thermostat to control water temperature and indicate temperature in LCD of Wired Controller.
(3)Green environmental-friendly refrigerant R407C.
(4)With high pressure and low pressure protection system.
(5)With auto-stop protector at cold temperature below 5C.
(6)With automatic defrosting system.
(7)By using world famous brand compressor.
(8)Easy installation and simple operation.

Technical parameters:
Heating capacity:  11000W
Rating input power  : 2491W
Maximum input power: 3130W
Energy Efficiency Ratio (EER) ??4.4
Average water flow  : 4.2 m3/h
Power supply: 220-240V/50Hz
Rating currency: 12.65A
Noise lever: 66dB(A)
Net/Gross weight:  105/115kg
Refrigerant (R407C) input: 1800Grams
Inlet & Outlet water pipe diameter: 1.5 inches (50mm)
Water flow of water pump: 5-10 m3/h

Note:
(1)Above parameters are collected under the following conditions: Outside temperature at 15C, initial water temperature at 15C, average water flow at 4.2m3/h, tested water volume is 1m3.

(2)This unit works efficiently while the water temperature is 10-30C and outside temperature is 15-25C. And it is workable if the conditions differ but not too far from above mentioned temperatures, and its working performance will be different in such situation.

Contact Infomation
Send Inquiry
Company name:Hongkong Autair Industrial Co., Ltd.
Status:[Offline] [Send message] [Chat]
Business contact:Huang(Mr.)
Telphone:
Fax:
Area: Caribbean Region-Bermuda
Address:Haiyan Road, Xiangzhou, Zhuhai, Guangdong, China