1. High power LED spotlight
2. Low-light failure,
3. Unique cooling system
4. High power LED, high brightness
5. Lower consumption
EL-GU10-C1W3-M LED Spotlight
1. High-Brightness LED Lamp: Low-light failure, the work of 35, 000 hours Luminous flux can be maintained at above 75%.
2. High standard of security protection: 4000V high voltage test by the European Union. Drive circuit is isolated switching circuit, to ensure safety.
3. Unique cooling system: Aluminum shell of effective dissemination of internal heat. But also of overheat and overvoltage and overcurrent protection.
Description of product
1. High power LED, high brightness, lower consumption, eco-friendly
2. Long life 50, 000, constant current design, 1, 000 hours of continuous light beam to maintain 95%
3. Emitting angle: 30-60
4. High thermal conductivity of aluminum alloy, multi-level fan cooling structure that LED lamps have a better heat of dissipation
Products features
Brand
Edgelight®
Name
LED spotlight
Light source
High power LED
Specification: 3W
LED emitting angle: 30-60
Chip: 0.1mm
Voltage: 12V/220V
Working condition: -25_45
base type: E27/MR16/GU10
Eco- friendly: Yes
Color light: Warm white /white
Life: 50, 000
Advantages
Long Lifespan
Long life: 50, 000 hours.
Environmental protection, energy saving
The features of super-power saving, low cost, low power, long life have an absolute advantage in saving maintenance Costs.
Superior ability to adapt to the environment
Indoor, outdoor, at -40° C-65° C, humidity≤ 65%, can be normal safe operation
Durable and reliable
No tungsten wire, the possibility of a small scrap of non-normal, extremely low maintenance costs.
Wide input voltage range AC86-AC265V
Safety
The drive circuit is isolated switching circuit, to ensure safety.
Quality Assurance
Operation current is constant. Constant current power supply, no strobe.
A unique cooling system
Aluminum shell can effectively disseminate internal heat, and have overheating and overvoltage And overcurrent protection.
Safety instructions
Instructions for use
Input voltage AC86-AC265V, can only be installed to the lamp inside of E27, this product does not have the waterproof
Function. Indoor use, or suitable to waterproof lamps inside. Does not have waterproof function.
Twist does not need tools. Can not use a lot of effort to twist.
Please do not use in high temperature situations. When the temperature is too high, over-temperature control circuit starts, the output will be cut off, light off a few minutes, the temperature
Was lowered to normal.
Notes
After opening package must be carefully examined to see if there is damage. If there is damage,
Then notify the supplier immediately, do not use damaged lights.
